Installation conditions
The house meets the installation standard of steam room; There must be sufficient power supply capacity, and the incoming line shall not be less than10mm2; Lightning protection grounding wire must be installed; Indicates the installation position of closed circuit and electric cabinet; The house meets the standard conditions stipulated by the local safety fire department.
Materials needed to build the steam chamber:
(1) Hanzheng Nano provides special materials for the steaming room: imported electrothermal film, germanate backrest, heat-insulating reflective film, functional non-woven fabric, temperature controller, temperature-resistant lamp holder, cold press pliers, negative ion lamp, far-infrared lamp, special waterproof adhesive tape cement, etc. ...
(2) Other materials needed for steam room construction: wood square, wires, silt, putty, stupid board, extruded board, gypsum board cement pressure plate, light switch, hardware (nails) miscellaneous, wooden stool board, etc. ...
(3) Labor required for steam room construction: electricians, carpenters and bricklayers.
Construction technology of steam room;
1. Made of "sufficient" tourmaline materials (raw materials: tourmaline nano-powder, tourmaline grains, tourmaline ore or plate), all made of high-quality tourmaline materials.
2. Selection and construction of electric heating equipment: Select "high quality" far infrared electric heating film or carbon fiber heating equipment for treatment. The concept of "high quality" is power saving, rapid heating, uniform heating and trouble-free. The construction of electric heating equipment is very important, which must ensure safety, reasonable laying, energy saving and good temperature control effect. If the heat conversion rate of the electric heating system is low, it will seriously affect the heating time and electricity consumption of the steaming room.
3. Health and environmental protection requirements: The auxiliary materials shall be free of formaldehyde, compound glue, potential odor and other substances harmful to human body during heating.
4. Selection of indoor location of steam room, treatment of thermal insulation effect, moisture prevention, etc.
Application mode
1, turn off the main power switch of the steaming room first.
2. Generally, the system setting of geothermal temperature controller does not need to be started manually, and the system automatically senses.
3. Unscrew the temperature control key of the wall heating system of the steam room and look at the temperature control display table. The temperature difference should be kept between 38 and 43 degrees.
4. When the room temperature reaches about 38℃, it can be steamed indoors;
5. The temperature of the steaming room is 38℃-43℃.
6. The steaming time is 40-60 minutes.
7. Sedate and soothe the nerves, improve the function of respiratory organs, activate human unit cells to absorb nutrients and excrete them into human unit cells.
The above is an introduction to the construction of steam room. It is not easy to build a steaming room, and it is not particularly difficult to say that it is difficult, but it must be done by professionals and cannot be installed by themselves. Some steam rooms don't need to be installed, because some steam rooms are directly equipped, but some steam rooms are connected with the bathroom, so construction layout is needed. We can choose different types of steaming rooms according to our own needs. There are many brands of steaming rooms, and the quality and function of steaming rooms are different. You can compare it when you choose.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~