The principle of this "biomass charcoal gas generator and garbage gas generator" should be similar, they all use the same principle and will never change.

I didn't look for this information in detail, but I want to remind you of the following points.

1, if his products and technology are suitable for "large" biomass gasification generators (that is, factory-built complete sets of equipment) or garbage gasification generators (that is, related equipment of garbage stations or garbage incinerators), these two fields are still credible, because the technology in this field is not innovative now, and this theory was put forward n years ago. Maybe this "biomass charcoal gasification generator and garbage gasification generator".

But be sure to remember that I am talking about complete sets of equipment in large factories, usually hundreds of thousands or millions. Moreover, the degree of automation is very high, and the vaporization rate and gas production of this thing are relatively low, which is not well controlled.

2. If this "biomass carbon gasification generator and garbage gasification generator" is a miniaturized or personal household "biomass gasifier", don't believe it, because the biomass generator or garbage gasification generator has its inherent fatal weakness in miniaturization, don't believe it.

The so-called "biomass gasifier" for home use (other online publicity names, such as straw gasifier (straw semi-gasifier), biomass semi-gasifier, firewood gasifier (firewood semi-gasifier), etc.), in short, as long as it is a "biomass gasifier" for home use, the technology in miniaturization is not comprehensive at present.

The reason is that biomass has strict control requirements on the gasification principle, such as "temperature control, time control, raw material crushing (i.e. biomass crushing), raw material desulfurization (i.e. biomass desulfurization) and raw material drying", and the temperature is not high, so the gasification is incomplete or impossible; The time control is not ideal, the vaporization is incomplete and the efficiency is not high; The raw materials must be completely crushed, which is related to the time and efficiency of vaporization reaction. Without crushing or incomplete crushing, it is impossible to vaporize for a long time or not to produce much gas. Raw materials must be desulfurized first (usually washed with water), and they must be fully dried before entering the "generator" for vaporization. Otherwise, the generated gas contains a lot of tar, which is corrosive to the inner wall of the generator or pipeline and has congenital defects.

These aspects are full of faults even when large complete sets of equipment are running.

What household "gasifier" is full of holes, in which desulfurization is fatal. Therefore, the domestic "gasifier" is basically a kind of waste.

3. Reminder! !

If you want to buy ~ ~ large complete sets of equipment, I suggest you go more. This thing has a high failure rate. Look for manufacturers with good technology and timely maintenance services, not small manufacturers.

I hope my answer is helpful to you.