Introduction of Gree Electric Heating
There are many types of electric heaters, including convection, energy storage and microcirculation. Gree electric heaters also include the above-mentioned electric heaters. Using electric heaters to keep warm is cleaner and can save energy to some extent. When the electric heater is working, it will not produce noise and pollution, so it is also the most energy-saving and environment-friendly heating method. Gree has been engaged in the production of electric heaters for a long time, so Gree electric heaters are also very famous in the brand ranking of electric heaters. How about Gree electric heating? Let's learn more about it through Bian Xiao's introduction.
1, fast heating: The traditional heating speed is 2 hours, and it can reach 18 degrees Celsius in 15 minutes with a heater.
2. Comfortable heating: the heater generates heat evenly, and the heat energy is even and constant from bottom to top, which fully meets the needs of the human body. Show the concept of' warm feet and cool head' advocated by Chinese medicine.
3. High efficiency, energy saving and environmental protection: The electrothermal conversion rate of the heater heating system is greater than 99.8%, which is the product with the highest electrothermal conversion rate on the market at present. The heating rate is fast, energy and electricity are saved, and the operating cost is less than that of the traditional method. No harmful gas emission, no noise and dust pollution, no air blockage and drying problems.
4. Health care function: the heater adopts the new far-infrared radiation principle, which constantly generates far-infrared waves during operation. It has obvious curative effect on cardiovascular diseases, lumbago and leg pain, arthritis, scapulohumeral periarthritis, cervical spondylosis, gastrointestinal diseases and gynecological diseases.
5. Simple structure: The main components of the heater heating system are the carbon crystal heating plate, the power connection wire and the temperature controller. The construction and installation are very simple. No matter whether it is integral heating or local supplementary heating, there is no restriction on the design and auxiliary installation of the system, and the design concept of' people-oriented' is completely achieved.
6. Convenient installation: the heater only needs to fix the heating plate on the wall, and the floor heating can be installed by ordinary electricians only by adding the design in the decoration project. It can be laid in a short time, with low cost, or it can be partially installed, which does not occupy the household area and relieves the tense living environment.
Second, use Gree Electric heating.
1. How to use the thermostat
Use the thermostat correctly. The oil-filled radiator heater has no thermostat, and the surface temperature of the heater shell can be adjusted at will (below 1 10℃). During normal operation, the thermostat cannot always be set at the highest grade, otherwise, when the working temperature of the heater surface is close to 1 10℃, the thermostat is not easy to operate, and working at high temperature for a long time will burn out the internal devices or damage the protection. Therefore, when using the oil-filled radiator heater for the first time, the heater should be set in an appropriate position.
2. Pay attention to strength.
Correct selection and use of power switch. The oil-immersed radiator heater adopts two sets of sealed cathode electric heating tubes as heating elements, and the two sets of electric heating tubes are correspondingly provided with two-level selector switches. Common heaters on the market are 1500W and 2000W w. When waiting for the line to allow, the correct selection of power gear can save electricity and reduce the line load. When the heater is turned on or the indoor temperature is low, turn on the two-speed selector switch at the same time, and the heater will heat up quickly. When the working temperature of the shell surface reaches the set temperature point, the thermostat will automatically cut off the power supply. At this time, you should choose 1 or a power of 2.
3. Power requirements
Electric heaters have some requirements for power supply. When using electric heaters, three hole socket with grounding wire whose technical indicators meet the standard must be used. Never switch to a two-hole socket without a ground wire, because it is easy to generate static electricity, and sometimes it will feel like an electric hand, which is more dangerous. In addition, the socket should not be located directly above the electric heater to prevent the heat from rising and burning out the power supply. Third, whether there are electrical appliances that are easy to cause sudden changes in current and are frequently used, such as electric welding machines and impact drills. It is easy to damage the electric heater, so be careful. It is best to use a patch panel with over-current protection device, or choose a regulated power supply.
The brand Gree has always been concerned by people, and Gree's refrigeration products have a good reputation as well as heating equipment. The above article mainly introduces some quotations of Gree electric heaters for everyone. It can be seen from this article that the quotation of Gree electric heaters is still relatively affordable, and you can choose to buy Gree electric heaters for basic family situations. If people want to live comfortably and warmly in winter, they must choose regular brand electric heating products, such as Gree electric heating, which is worth buying.