Emmett water dispenser is a convenient household appliance. We often use it to drink hot water, cold water, warm water and other different water temperatures. But sometimes we will find that the water dispenser is short of water, which may affect our daily use. So what is the water shortage fault of Emmett water dispenser?

First of all, we need to make clear the performance of Emmett's water shortage fault. Under normal circumstances, the failure of water shortage in drinking fountains is that there is no water flowing out after starting, or there is only a trickle, which cannot be used normally. At this time, we can solve this problem by the following methods:

1. Check the water supply source: Emmett water dispenser needs fresh water to work normally. If the water supply pipeline is cut off or the water quality is unstable, water shortage will occur. Therefore, we must first check whether the water supply pipeline is unblocked and whether the water quality meets the requirements.

2. Check the bucket: Emmett water dispenser needs a bucket to store water. If there is no water in the bucket or the water level is too low, it will also lead to water shortage. At this time, you need to open the lid of the bucket and check whether the water level is lower than the water inlet of the pump. If it is lower than the water inlet, you need to replenish the water source.

3. Check the filter: If the filter is not replaced for a long time or cannot be cleaned normally after repeated use, it will be blocked. At this time, it is necessary to check whether the filter needs to be replaced or cleaned. Cleaning the filter can improve the quality of water source and prevent the failure of water shortage in the drinking machine.

In a word, the water shortage of Emmett drinking fountains is a common problem, but as long as the root of the problem is found and the correct solution is taken, the problem can be solved smoothly and the good use effect can be restored.