1, loosen the clutch slowly.
When you start to loosen the clutch, you must slowly loosen the clutch at a constant speed. When the car has enough vibration power, you can lightly step on the accelerator to refuel, and it will not stall.
2, neutral lighter
Don't use gear to light when starting. Many candidates will make this mistake because they are nervous, so they must get into the habit of striking a light with neutral when practicing.
Step 3 start from the slope
If the starting point of the exam is on a ramp, you must step on the clutch and brake at the same time, and then slowly release the clutch. After the car body shakes slightly, stabilize the clutch and then slowly release the brake.
4. Skilled cooperation
In addition to these, you must skillfully cooperate with the three pedals of clutch, brake and accelerator when you start normal practice.
Start-up taboo of extended information topic 3:
1, an unstable start. Starting is the first step of vehicle running. When starting normally, it is required to start smoothly and safely, to have a correct driving posture, not to look down at the machine parts, but to look ahead and on both sides of the road. It is required that there is no forward thrust, jitter, flameout and intermittent arching when starting.
2, two bogey starting gear selection is not appropriate. The gear selection of the car should be based on the specific conditions of the car, road and slope. Generally, on a flat and solid road or site, you should choose 1 or 2 to start; If you are in a cold climate, loose soil area or uphill section, you must use the first gear to start; On icy and muddy roads, you must also start with the first gear, and you should also remove the snow and mud under the wheels or sprinkle sand under the wheels.
3. When starting, avoid improper cooperation between clutch pedal, accelerator pedal and brake pedal. This cooperation must be skilled.
4, four bogey still put your left foot on the clutch pedal after starting or forget to release the parking brake lever when starting. These problems are often easy for beginners to make.