Five fingers are naturally close together, so it must be natural. It seems that you are pinching beans with your thumb and forefinger, and then you put the pen on the middle finger, sandwiched between the first two fingers, and draw a line on the middle finger with the last two fingers. The pen leans against the tiger's mouth.
Second, after using the pen, you should fasten the pen cap conveniently.
This can protect the pen tip from being dried, and the pen cap can protect the pen tip well to prevent the pen from dropping. When writing, it is best to buckle the cap at the end of the pen. In this way, if the pen falls and the tail is heavy, the nib will not land first, which is also a way to protect the nib. It's best not to buckle the pen with metal shell like this, which will easily wear the shell coating.
Third, the correct ink absorption method of the pen
1, take out the bought pen, pull off the top and unscrew the bottom.
2. Push down the ink storage tube with the piston on it.
3. After pressing, take out the ink and put the pen tip into the ink, not too deep, as long as the pen tip can be immersed.
4. Then push the piston up slowly with the other hand. The ink was absorbed. Take it out.
5. Put the pen tip on a towel or paper towel and wipe it clean.
Extended data:
First, the pen maintenance
1, when writing, put some manuscript paper under the paper to enhance the elasticity of the nib and reduce friction. Don't write on hard objects such as metal to avoid damaging the nib.
2, avoid mixing different inks in daily use, so as not to precipitate and block the pen.
3. The pen should be cleaned once a month or so to keep the ink flowing. If carbon ink is used, wash it more.
If the pen is not used for a long time, it should be cleaned and preserved. And don't use too much force when writing.
Second, the choice of pen skills
1, pen tip smoothness You can pull out the pen cover and move the pen tip on white paper. Generally, the grinding difficulty of nib is the side. We do experiments and move the pen 30 degrees to the left and 30 degrees to the right on the white paper. If it is still smooth, it means that the sliding of the pen tip is guaranteed.
2. The main reason of water leakage is that the pen container is not well sealed. We can plug the nib and squeeze the liner. If it is difficult to squeeze, it shows good water leakage resistance. Of course, water leakage resistance is a comprehensive parameter.
3. Continuous writing time and intermittent writing time are the soul of a pen. If you buy a pen, you can't guarantee continuous writing and intermittent writing, which is equivalent to waste. According to the width of handwriting, the writing time is different. But usually it takes at least 30 minutes.
4, some mechanical properties, such as pen clamping force, mechanical properties of parts, pen sleeve tension, these are all concerned by users. Generally, mechanical properties can be tested by hand without any instruments. Users can pay attention to these details when choosing. Especially some expensive pens.
For the average user, what is more concerned is the appearance of the pen. Very dazzling, it is the initial idea of ordinary people choosing pens. Like Kaiser's gift pens, there are more than 1000 arrangements to choose from. Parker also basically designs three or four new styles a month. It seems that all major pen makers have made a big fuss about the appearance.
References:
Baidu encyclopedia-pen