Sensor open circuit:

1. It is possible that the sensor is broken, including leads, plugs and sockets.

2. The weather is too cold and the sensor resistance is too high, which causes the incubator to display this code.

When using the health pot for the first time, you need to test whether the health pot can work normally.

Firstly, clear water is poured into the health pot, and the water level is not lower than the heating element at the bottom of the pot body by about 0.5 cm. Then turn on the power supply, boil the water, evaporate the water until the water level is lower than the heating element, the health pot automatically stops heating, jumps to heat preservation, and gives a green light at the same time, indicating that everything is normal and there is no quality problem.

Extended data:

Precautions for use:

1. Please don't dry-burn.

2. When using, please wait for the water to boil before adding health care materials or flowers and leaves, and stir a little. If sugar is added, please stir them until the sugar melts, so as not to sink into the bottom of the pot and burn the bottom of the cup.

3. Health pots should not cook foods with less powder than paste, such as sesame paste, yam powder, coffee, milk powder, etc. , so as not to stick to the bottom of the pot and cause damage.

4. Before use, please confirm whether there is water in the socket and bottom of the health pot. If there is water, please plug it in, dry it and recharge it to avoid glass damage.

5. If there is scale in the pot after a period of use, please boil it with acetic acid, citric acid or lemon slices in water.

6. Please pay attention to blanching when using.

7. Don't put the health pot in the induction cooker and microwave oven.

References:

Baidu encyclopedia-healthy Guo