1. Measure the balcony height, and saw off the pVC pipe according to the balcony height.

2. Draw a horizontal line of 5cm every 10cm.

3. Saw the drawn line with a saw, not too much!

After sawing, bake it with fire, and then press a small tube in the cut place.

5. After pressing, cover the bottom cover and seal it.

6. Then put the soil in the pipe and transplant it, and the water pipe flowerpot will be finished!

PVC tube homemade three-dimensional flowerpot, even a small balcony can grow vegetables!

Growing vegetables on the balcony must be familiar to everyone. Growing your own vegetables is healthy, delicious and full of fun, with many benefits. However, many flower friends complained to Huahua that their balcony was too small and there was no place to grow vegetables. Huahua will help you solve this problem today. Make a three-dimensional flowerpot with PVC pipe. No matter how small the balcony is, you can grow flowers and vegetables!

first

raw material

PVC pipe (about 16cm in diameter, sold in places where building materials or hardware are sold)

see

step

1. Take a PVC pipe with a length of 80 cm-1m..

2. Draw a horizontal line of 5cm every10cm.

3. Draw a line and you will see it.

4. After sawing, bake with fire.

5. Take a small tube and press it down while it is hot (never press it directly by hand, it will burn easily ~).

6, all the bottom cover is OK.

7. Burial and transplantation

Look at this growth, it has been growing!

The second paragraph

raw material

PVC drain pipe:

A 200mm, a 160mm, two 200mm elbows, a 160mm tee, a 200/ 160d tee and a bottle of PVC glue.

step

1, model first.

Step 2 make a hole

3. Put it in the soil and transplant it.

Although the round hole is beautiful, it is too troublesome. The square hole of the straight tube can also be punched.

third segment

raw material

Foam box (you can buy one at the fruit shop for one or two yuan)

Art knife, ruler, pen

step

1, use a pen and ruler to draw lines with the size of the planting groove on the foam box and the cover at regular intervals.

2. Cut the foam box according to the predetermined size with a utility knife, and the cutting direction of the planting groove around the side is inclined at 45 degrees.

3. Connect the lid and the box with adhesive tape, and erect the box. The smallest side is the bottom surface and the top surface, and there is a big rectangular opening at the top.

4. After transplanting, put planting soil, water and roots from above.

Section iv

raw material

PVC pipe, punching machine

step

1, punch

2. Bake your elbow with fire.

3, quick paste on the hole

4, soil, planting

Old oil drums can do the same ~

Section 5

raw material

Some leftover materials of floors and partitions during decoration.

step

Cut and assemble according to the shape of scraps, and you're done!

The practice of so many three-dimensional flowerpots

There is always a suitable for you

Try it quickly ~ ~ ~

reference data

[ 1]

[2]

Don't throw away more PVC pipes after renovation. What can it be converted into?

When decorating, many materials are bought in advance, in case it is not suitable when it is not enough, or you have to go again. For example, PCV pipes are generally used as water pipes or threading pipes, which are basically redundant. This kind of pipe is hard and wear-resistant. If there are unused pipes, you can refer to the following cases to make full use of materials and not cause waste.

Make a decorative painting. Cut PVC with different sizes into the same length, stick it on the board with glue according to the pre-drawn shape, cut the big pipe in half and stick it below to make a trunk. Those large and small cylinders can be decorated with gadgets of various colors. In a home with children, you can also put children's toys in it and turn it into a picture that can be accommodated, which is both beautiful and practical.

This hexagonal ornament can be glued to the pipe wall according to the shape, and then added with two screws and a chain, which can be hung on the wall or behind the door for decoration. Put colored balls in the spool, and the empty space can also be used to put small objects that are easy to lose, such as keys and remote controls.

In the above picture, the upper and lower ends of the pipe are cut obliquely, and glued to the wall or cabinet door with sticky water or thick double-sided tape, just enough to put the milk pot, soup spoon, rice spoon and so on. Still ventilated, no water. The orderly arrangement is also very beautiful, which makes the kitchen more tidy.

This waterproof and durable article must be made into flowerpots. Because PVC has the shape of a bent pipe, the flowerpot made is unique in shape. Different green plants live in a pot, and plants of different colors grow in a pot, which is much more interesting than just looking at a pot of flowers.

Of course, when it comes to PVC pipes, it is indispensable for PVC pipes to inherit their artistic functions-shoes. Wrap the outer wall of the tube with paper with your favorite lines, then clean and fix the tube. This is a very creative shoe storage rack. Of course, the pipe wall can also be designed to be pure white according to everyone's preferences, without packaging.

When PCV pipe is not used for pipeline, it has many uses, such as pen container, rice container, lamp holder and so on. These are simple and automatically faster objects. As long as you have imagination, you can be creative.