Current location - Health Preservation Learning Network - Health preserving class - How to deal with frost leakage from roof vent
How to deal with frost leakage from roof vent
1. Steps: ① General introduction ② Required tools/raw materials ③ Methods/steps ④ Matters needing attention.

2. Common sense: ① Answer questions directly ② Give specific reasons/reasons/introductions in detail.

3. Reason category: ① Explain the reason/reason in detail ② Provide effective solutions (see step category for the composition).

4. For other types, please refer to the quality standard (click on the right side of the answer box, is the pipe broken or is the side of the pipe leaking downwards? If the pipeline leaks, first clean up the garbage and cement around the pipe hole, stick the pipeline around the pipeline and make a circle with a width of 3 to 5 cm. Then prepare a short pipe with the same diameter as the pipeline and a length of 5 to 20 cm, cut it vertically into an open ring, brush a circle of PVC drainage pipe glue at the height of the trachea hole, cover the hole with the short pipe, and sprinkle water around the pipe trench after the glue dries. If the pipeline does not leak, as long as the surrounding grooves are properly deepened, it can be leveled by blocking the king. Picture)