The temperature in the world is changing more and more violently. It is getting higher and higher in summer and lower and lower in winter. In summer, it's cool and hot, like an oven; Winter is covered with snow and ice, and the temperature drops below zero. People living in the south will not experience the world of snowy ice fields, let alone thick cotton-padded jackets. But northerners all know that we should learn to keep warm in winter to avoid discomfort and frostbite. So northerners use electric heaters to keep warm. Therefore, what I recommend to you today is the use of Emmett electric heater and Emmett electric heater.

At present, there are two kinds of anti-dumping switches for Emmett electric heaters. One is special for Reting series. When the machine is not in an upright and stable state, it will be cut off, and it will not be cut off if it is lifted vertically.

The other one is for electric heaters. This anti-dumping switch will cut off the power supply when the machine leaves the contact surface or the contact surface is uneven. In addition to preventing toppling, it can also prevent the contact surface from being unstable.

How to use Emmett electric heater;

1. First turn on the power switch of the electric heater.

2. Then turn the thermostat knob clockwise to the maximum position.

After heating for a period of time, when the indoor temperature is warmer.

4. Turn the thermostat knob counterclockwise.

Stop spinning until you hear the beep of the thermostat.

6. At this time, your indoor temperature has been set.

7. When the indoor temperature is lower than the temperature you set, the electric heater will automatically restart.

8. Start heating until the temperature reaches your set temperature, and then disconnect it again.

9. In this way, the temperature of your room will always be kept at the temperature you set.

10. At the same time, the thermostat also has anti-freezing function. For example, in order to avoid freezing indoor facilities when the temperature is below 0℃, you can turn on the power supply.

1 1. Turn on the power switch and set the temperature control switch to "*".

12. When the indoor temperature is lower than 0℃, the electric heater will start automatically.

13. Start heating and keep your indoor temperature not lower than 0℃.

At present, Emmett electric heaters are mainly used in toilets, such as HP 1568, HP 1587, HP2009, HP 1555, HC22 15, HC 1808, etc. Others, such as radar radiator, can't be used in the bathroom, so consumers are in the bathroom.

After today's detailed introduction of Emmett electric heater and its usage, I believe everyone can use Emmett electric heater and Emmett electric heater. Using Emmett electric heater can help you avoid the problem that the electric heater cannot be used because of the wrong use. Tips: Emmett electric heater needs to be plugged in. When using Emmett electric heater, pay attention to electricity safety, and don't cover it with cloth, otherwise it will lead to disaster.