First of all, workers put the small stainless steel bags into the welded furniture and weld them together accurately, then put them into another welded furniture, add a central cut on the back of the belt buckle, melt the top of the central cut into a smooth ball after welding, and then fix the belt on the belt buckle. Then the workers saw the shape of the belt buckle from the pure silver plate with a wire saw, and then printed the company logo on it. Then weld the newly welded steel bar with melted steel glue.
Second, then use the wire tool to cut the letters, and the font size of the letters can be customized. Then, use a welding torch to coat the solder on the back of the letter. The workers carefully picked up the letter and put it on the sterling silver belt buckle. When the worker heats the back of the belt buckle, the letters will stick tightly to the surface of the belt buckle. Then, put a polishing mirror on the belt buckle and polish the belt buckle as bright as a mirror with a polishing wheel. In order to make the belt buckle look more luxurious, workers will carve the belt by hand with various tools, and then the belt will follow suit.
Third, the workers spread the raw materials of a belt on the table, and then cut a belt with a leather knife according to the width required by customers. Next, the workers will use more than a dozen tools to carve and shape the belt. First, cut off two pieces of tape and soak it in water at room temperature for about five minutes. When the belt stops bubbling, it means it is saturated.
After the belt is completely dried, the worker prints the designed pattern on the belt, then cuts out the hook groove with a blade according to the texture of the pattern, then deepens and widens the hook groove with a carving knife, then makes a relief background with a disposable background carving knife, and then paints a dark dye on the carved relief background, and prints the factory logo on one end of the belt.
Finally, a sheepskin is painted on the surface of the belt to make it look more retro. After completion, the worker punched several small holes in the belt with a punching machine, and then connected the belt with the belt buckle with a hollow rivet, and it was finished.