First, the plastic floor-brand
Kenya 1
Established in 2003, Kendia has more than 2,000 brand stores in China. Products are exported to more than 20 countries and regions. Products also include floors, flooring materials, wooden doors and windows, plates and intelligent wooden houses. Committed to building a "global mainstream supplier of wood products".
2. forbault
Headquartered in Switzerland, forbault has 365,438+0 production bases and 42 sales outlets in 32 countries, with more than 6,000 employees and annual sales of US$ 65,438.09 billion. In addition, the company is committed to product development and innovation of flooring materials to meet all-round market demand. Use linen environmental protection floor, commercial plastic floor, carpet and other products.
3. Han Hua
Hanhua was founded in 1965, mainly engaged in building materials such as floor materials, window materials and artificial marble, auto parts such as GMT and interior materials, functional materials such as functional films and decorative boards, and electrical and electronic communication parts and materials. Like other occupations, cultivate into a strategic occupation in the future.
Second, the advantages of plastic floor-plastic floor
1, waterproof and antiskid
Simulation of wood grain, anti-slip, waterproof and paving can reduce the safety hazards of the elderly and children. It is incomparable with stones, tiles, etc.
2, super wear resistance
Good wear resistance, the floor surface is covered with 0. 1-0.5mm thick special polymer material, and the service life of similar products is longer. Compared with the thin transparent film on the composite wood floor or the glaze on the ceramic tile, it is not only that.
3. Light weight
Plastic floor is relatively light, 20 times lighter than ceramic tile after construction, and it is safe and reliable to carry.
4, the construction is convenient
No cement or sand is needed for construction. Just use glue to smear, quickly, easily, freely mix, save time and effort, and determine at one time.
5, good elasticity
Comfortable and flexible, it can provide the highest protection for family members in daily life.
6. Good thermal conductivity and warmth retention.
Good heat conduction, even heating, not afraid of barefoot in winter.
Third, the plastic floor construction technology
1, in operation, measure the size of the space first, and cut the floor according to the size, paying attention to the cutting width slightly larger than the required width, so that it can be lapped and trimmed later.
2. The cut floor should be left for 24 hours, so that the curled part of the board can be fully unfolded for laying.
3. Before operation, clean up the dust and stains on the ground first, then level the convex place, level the concave place with 1: 2 107 glue and cement, and then dry it with sandpaper. After the ground is leveled, it can be glued and laid.
4. Before operation, stick the floor, spread it one by one, and spread it one by one. The width of 10 cm should be reserved at the seams of leather, and no glue is needed to avoid post-seam treatment.
5. During construction, the diagonal lines shall be aligned. After completion, use a long handle to compress the exhaust from the inside out. The joints of the floor should be spliced by lap cutting method, in which the width of the lap should be about 5 cm, the center of the lap should be aligned with the long steel rule, the edge strip should be cut with a cutting machine, and then the joint should be deleted. Apply glue to the joint, then close the joint with a press roller and press it tightly. Finally, clean up the excess glue so as not to affect the appearance.
The above is all the contents of the plastic floor introduced by Bian Xiao.