There is a five-window electronic watch on the treadmill, which shows the running speed, time, mileage, calories burned and heart rate of athletes. In this way, athletes can know their physical condition like the back of their hands when exercising. Because the transmission roller belt is rubber, the impact on the joints of legs and feet is much smaller than running on the road, and it is not easy to cause injury, which ensures the scientific and safe movement. Treadmill is a kind of fitness equipment that simulates running and walking. Running and stepping belong to systemic aerobic exercise.
Common faults of treadmills and their solutions;
(1) The electric treadmill cannot accelerate.
Possible reasons: 1, the instrument panel is damaged; 2. The sensor is broken; 3. The driving board is broken.
Solution: 1, replace the instrument panel; 2. Replace the sensor; 3. Replace the drive plate.
(2) The running belt of the treadmill slips.
Possible reasons: 1, running belt is too loose; 2. The multi-groove belt of the treadmill is too loose.
Solution: 1 Adjust the balance bolt at the rear end of the running belt (rotate it clockwise to be reasonable); 2. Adjust the fixed position of the motor.
(3) The treadmill stops automatically:
Solution: 1, please check the problems in the bank carefully; 2. Check the cable; 3. Replace the drive plate.
Possible reasons: 1, short circuit; 2. There is something wrong with the internal cable; 3. There is something wrong with the drive board.
(4) There is noise during exercise.
Possible reasons: 1. Because the space between the cover and the running belt is too small, there is friction between the cover and the running belt; 2. It may be because there is a foreign body between the running belt and the running board during exercise; 3. The running belt is seriously deviated, causing friction with both sides of the running board; 4. Motor noise
Solution: 1 Correct or replace the machine cover; 2. Remove foreign bodies; 3. Adjust the balance of the running belt; 4. Replace the motor.
(5) The treadmill cannot be started.
Possible reasons: 1, power failure; 2. The fuse is blown; 3. The switch of the electric treadmill is broken; 4. For other reasons, please contact our professionals.
Solution: 1, please check the power supply; 2. Replace the fuse; 3. Replace the power switch.
(6) Feeling uncomfortable when running
Possible reasons: 1, check whether the running belt is too loose; 2. Check whether the multi-groove belt is too loose;
Solution: 1 Need to be adjusted according to the instructions in the manual; 2. Adjust the speed to the lowest, step on the running belt with your feet, observe the tightness of the multi-groove belt, and adjust the front roller; 3. Add lubricating oil to the pedal and lubricate the pedal.