1.AD The treadmill does not rotate.
When you find that the AD treadmill does not rotate, the most common reason is the power failure of the treadmill. If the power plug is not plugged in properly, or the socket is in poor contact, the treadmill will not start. Another reason may be that the power switch is broken. If the power switch of the treadmill is broken, it needs to be replaced.
2. The 2.AD treadmill is not responding.
If you find that the treadmill doesn't respond after pressing the relevant button of the treadmill, it may be that the control panel on the treadmill is out of order. In addition, it may also be caused by wire failure.
3.AD treadmill motor has noise.
If the motor makes abnormal noise when using the AD treadmill, it may be that the front and rear rollers of the treadmill fall off or the bearings are excessively worn. It is also possible that the motor is out of order and needs to be replaced.
4.AD Treadmill Fault Code E 1
When the treadmill has a fault code E 1, it is usually because the speed sensor has a fault. Because the speed sensor is one of the key components to measure the speed of the treadmill, if it fails, it will affect the normal use of the treadmill. The speed sensor needs to be replaced.
5.AD Treadmill Fault Code E2
Fault code E2 is usually caused by a motherboard fault. If the motherboard fails, the treadmill will not work normally. At this time, the motherboard needs to be replaced.
In short, if you have the above faults or other problems when using the AD treadmill, remember to find a professional maintenance engineer to troubleshoot and repair the faults in time. At the same time, we should also pay attention to maintenance at ordinary times to avoid failure.
1, Grand Customs Clearance: 382 meters above sea level, the mountain is composed of Cretaceous white granite, with an area of 10 km2.
2. Shangji Nanhu Park: