①P Park gear: When entering this gear, the transmission locking mechanism starts to work, so it can only be engaged after the vehicle stops.

②R reverse gear: it can only be engaged when the vehicle stops.

③N Neutral: When the torque converter is at high speed, the driving force cannot be transmitted to the gear transmission, and neutral is used for short-term parking.

④D forward gear: used when the vehicle is moving forward, and the forward gear is below neutral.

⑤L low gear: Put the gear in L gear, and the transmission will fix the gear in the middle of 1-2 gear. At the same time, the braking system can be developed by using automobile engines. The key is to use the following long slopes and their climbing sections.

⑥S fitness gear: The key of exercise mode is to use it when driving fiercely. In this way, the driving force of the automobile engine is in the best state, but the fuel consumption will increase.

⑦M manual gear: Manual mode can generate a lot of driving pleasure for drivers, and at the same time, it has stronger adaptability to complex real-time road conditions.

⑧B brake system gear: also known as mechanical energy recovery gear, it generally appears in hybrid or pure electric vehicles. After shifting gear, it can improve the endurance of the vehicle, and at the same time, it can reasonably give the vehicle braking and driving force when going downhill for a long time.

Practical operation method of Chevrolet Mai Rui Bao XL shift

1, the application of paddle shifting

Step on the brake pedal first, then shift to the "D" position, and push the door handle to the right. At this time, you can also downshift the vehicle according to the "-"downshift tab on the left and upshift the vehicle according to the "-"downshift tab. Manual mode is more suitable for specific driving conditions and accurately controls the torque and speed of the vehicle.

2. Gear selection under different road conditions

① Starting uphill: This road must be intervened with high torque, and "D-" building blocks can be used. Sometimes we will find that the driving force is left, and we can temporarily apply "D" to upshift. If the driving force is still insufficient, S-block motion mode can be applied.

② Downhill: you should use the "D" gear to shift to 2/3 gear, and the automobile engine limit can prevent the automobile brake pads from heating and failing due to long-time stepping on the brake pedal. In general, you can use 2/3 gear to limit the vehicle. When the mountain is extremely steep, please use 1 gear to cooperate with the brake pads to go downhill. Similarly, the vehicle skids faster and faster when it goes downhill, so it needs to be downshifted.

Million car purchase subsidy