1. Determine the motor model of the treadmill, and then choose a suitable position to turn the treadmill over.
2. Place the newly bought motor at the bottom of the treadmill, insert the wire, and pay attention to the position of the wire interface is the same as the bottom of the treadmill.
3. Loosen the motor screw and the base screw with a screwdriver, and then pull the screw down with a wrench.
4. Insert the new motor and base screws into the corresponding positions, and tighten the screws, being careful not to tighten them too tightly.
5. Make sure all the wire interfaces are connected normally, turn the treadmill back and install other parts.
6. Finally, turn on the power supply, run the treadmill for trial operation, and ensure that the motor operates normally without abnormal noise and fault alarm.
When installing the treadmill motor, you need to pay attention to: choose the appropriate motor model for installation, and pay attention to whether the screws are tightened and the wiring is correct. Whether the operation is normal needs to be carefully checked. If there are problems that cannot be solved by yourself, you can contact professional maintenance personnel to avoid safety accidents.