1. Determine the installation location.
The first thing to consider is to choose the installation location of the treadmill. Choose a relatively flat position. There should be no other objects around the treadmill, especially sharp objects, to prevent the running belt on the treadmill from being scratched during exercise. At the same time, pay attention to whether the surrounding sockets and power supplies can meet the power requirements of the treadmill.
2. Assemble plug-ins
Treadmills generally have some fixed plug-ins that need to be assembled. Refer to the product manual and assemble step by step.
3. Install the motor
The motor of the treadmill is its central part, which is responsible for driving the running belt to rotate. It is necessary to put the motor on the chassis of the treadmill according to the instructions, fix it, then connect the power cord and do insulation treatment to ensure safe use.
Mounting panel
Treadmill panels generally have components such as display screen and control panel, which need to be installed. During installation, it is necessary to carefully check whether the wires are connected correctly to ensure that all components can work normally.
5. Connect the locking lever with the running belt
After installing the whole machine, it is necessary to connect the locking bar to both ends of the running belt and lock it. Only in this way can the running belt run steadily.
6. Adjust the tension of the running belt
Finally, the tension of running belt needs to be adjusted. Too tight will bring a burden to the machine, too loose will affect the running experience. The correct tension of the running belt should be: with the increase of weight, the running belt can sink slightly, but still maintain a high tension.
The above is the installation method of the treadmill. You can follow these steps to install it. If you are not skilled in operation and need to pay attention to safety, you can ask a professional to help you install it.