Treadmill is one of the favorite fitness equipment for many sports enthusiasts, but after long-term use, the belt of treadmill is likely to wear, age and break. When the treadmill belt is broken, we don't have to worry too much, just follow the following steps to repair it.

To repair the treadmill belt:

1. Check the damage of the belt: First, you need to turn off the power of the treadmill and remove the exercise board. Check whether the belt is broken, worn or cracked. If it is only worn, part of the belt can be replaced. However, if it is seriously worn or broken, it is recommended to replace the whole belt.

2. Buy a new belt: After confirming the need to replace a brand-new treadmill belt, you need to buy a belt that meets the requirements of the machine in a reputable merchant or online store. Pay attention to buying belts that are consistent with the brand, model and specification of the machine.

3. Replace the belt: Before replacing the new treadmill belt, it is necessary to determine the operation mode of replacing the belt through the body of the treadmill. And put the treadmill in the required position. Then replace the table top and sports board at the bottom of the machine, unscrew the screws on it, gently remove the original belt, and then install a new treadmill belt according to the instructions in the operation manual.

4. Calibrate the belt tension: After replacing the new treadmill belt, it is necessary to calibrate the belt tension to ensure the good operation of the treadmill. Belt tension affects the load and stability of the treadmill, and generally needs to be adjusted to the degree of exertion for easy walking.

In short, when the belt of the treadmill is damaged, we don't have to panic too much, just follow the above steps for maintenance. Of course, in daily maintenance, we can also help reduce the damage of the treadmill belt through proper cleaning and maintenance.