Initial maintenance.

1.48 hours after the construction of PVC floor glue, the dust on the floor should be thoroughly removed after vacuuming, and the polluted place can be diluted with neutral cleaning agent and wiped with a rag (please contact the manufacturer or us for the dilution amount of diluent).

2. Remove the dirt on the floor, and wipe the dirt with a clean rag before the floor is wet.

After the floor is dry, mop the floor with special wax for waxing, and then evenly apply wax water. After the first pass is dry, apply it again.

Daily maintenance.

1. Sand prevention: use a PVC plastic floor mat at the entrance of the hall to prevent shoes from being brought indoors and scratching the ground;

2. Goods handling protection: When handling goods, especially when there are sharp metal objects at the bottom, don't drag them to the ground to prevent the floor from being laid down;

3. Fireworks protection: Although PVC floor adhesive is flame retardant (B 1), it does not mean that the floor will not be burned by fireworks. Therefore, when using PVC floor glue, people should not put cigarette butts, mosquito coils, electric irons and other high-temperature metal objects directly on the floor to prevent damage to the ground;

4. Regular maintenance of the floor: PVC plastic floor should be cleaned with neutral detergent, not with strong acid or strong alkali detergent, and should be cleaned and maintained regularly;