● Maintenance of the frame: dry the sweat on the frame with a dry cloth after each exercise to make the bicycle more durable (be careful not to wipe it with a wet cloth to avoid rust).

● Maintenance of flywheel: Wipe the flywheel frequently to keep it clean and ride more comfortably. After the flywheel is used for a period of time, it is necessary to add lubricating oil to the bearing for maintenance, so as to make the flywheel run more smoothly, reduce noise and prolong its service life.

● Maintenance of chain transmission mode: check the rotating chain regularly to see whether the chain is closely engaged with the gear and whether the chain is offset. If it is, it must be adjusted in time. After the bicycle is used for a period of time, it should be lubricated to prevent rust, improve exercise efficiency, reduce noise and make the bicycle run more smoothly. Chain is one of the core components of spinning bike, and regular maintenance can prolong the service life of the bike.

● Maintenance of belt transmission mode: check whether the belt is cracked or damaged and whether the belt is misplaced, so as to adjust or replace the belt in time. Belt type Sometimes in the groove of the belt, some rubber crumbs will fall off the belt, so it is necessary to clean the groove regularly to prevent the belt from running smoothly and causing the belt to jump ship. Belt is one of the core components of spinning bike, and regular maintenance can prolong the service life of the bike.

● Screw inspection: As the bicycle is used for a long time, the screws will be loose, so it is necessary to regularly check whether the screws in various parts of the body are loose or fall off, and whether the adjusting knob is loose, and tighten or replace it in time.

● Check the crank: If the crank is used for a long time, it is necessary to check whether the crank screw is loose, so as to reinforce it in time.

● Check the pedal: Due to the frequent movement of the pedal, it is necessary to regularly check whether the screw between the pedal and the crank is loose and reinforce it in time. Protective foot covers should be regularly checked for aging so as to be replaced in time.

● Maintenance of dial: keep the dial clean and tidy; Replace the battery in time after use to prevent battery oxidation from damaging the dial.

● Cushion maintenance: keep the cushion clean and dry.

In addition, the spinning bike should be placed on a dry, ventilated and flat ground. If you don't use it for a long time, you have to cover it with a hood to keep the body clean and tidy.