1. Ground pretreatment: clean the ground to ensure smoothness, dryness and no cracks.

2. Measuring and cutting: accurately measure the size of the site, cut the plastic floor according to the size, and pay attention to reserving suitable expansion joints.

3. Scraping glue: Scrape it evenly on the ground with suitable glue.

4. Flooring: Carefully spread the cut plastic floor on the rubber surface, spread it out gradually from one side, and gently tap it with a rubber hammer to make it stick firmly.

5. Welding treatment (if necessary): For plastic floors that need to be welded, use special welding tools to weld them, so as to connect the floors into a whole.

6. Rolling: roll the floor evenly with a roller to discharge bubbles, so that the floor is completely attached to the ground.

7. Cleaning inspection: After the installation is completed, clean up the construction site and check whether the floor is flat, firmly pasted and free of defects.

It should be noted that the specific installation methods may be different due to the different types of plastic floors and the requirements of manufacturers. Before installation, please read the product manual and installation guide carefully and seek the help of professional installers.

Recommended PSP floor, easy to install, professional construction team, nearly 30 years old brand, after-sales service is guaranteed.