1. Check the power plug and socket: If your treadmill suddenly stops running, first check the power plug and socket. Check whether the plug is plugged tightly and the socket is normal. Other electrical appliances can be used to test the socket to determine whether the socket has electricity. If there is no electricity, you need to find an electrician to repair it.
2. Check the wires: If the power plug and socket are normal, you need to check whether the wires inside the treadmill are damaged. Sometimes, the wires will be damaged due to long-term use, resulting in the treadmill can not operate normally. Open the inside of the treadmill to see if there are any hard injuries or wires falling off. If yes, please ask the maintenance personnel to replace it.
3. Check the motor: If the power supply and wires of the treadmill are normal, then you need to check the motor. Motor is the core component of treadmill, and it is also the most prone to failure. If the motor fails, the treadmill will not work normally. Open the casing of the treadmill and see if the motor is out of order. If yes, please ask the maintenance personnel to replace it.
4. Check the circuit board: The circuit board of the treadmill is also a common fault point. If the circuit board fails, the runner will stop automatically. Open the casing of the treadmill, check the state of the circuit board, and find a professional maintenance person to replace the fault.
In short, the running deviation of the treadmill may be caused by many reasons. The above four situations are relatively common, and you can rule them out according to these situations. If you can't find the problem or are not sure how to repair it, please contact professional maintenance personnel. When operating the treadmill, pay attention to safety, so as not to cause greater failure.