First, open the packing box of the treadmill, and take out various components of the treadmill, including the body, pedals, walking bars, displays, supporting feet of the pedals, etc.
Secondly, according to the installation drawing in the manual, the support feet are fixed at the bottom of the fuselage. In order to ensure the stability of the fuselage, it is necessary to tighten the screws with a screwdriver.
Then, insert the pedal into the base of the main engine, make sure the insertion position is correct and align with the connecting hole, then fix it, insert the screwdriver into the insert link hole and tighten the screw.
Next, install the handrail, which is a little heavy and may require two people to assist in the installation. One side is inserted into the bottom buttonhole, and the other side is inserted into the top buttonhole, so that the crutch is installed on the treadmill.
Finally, install the monitor, insert the monitor into the plug on the main control board, and put the monitor on the walking frame. One thing to note is that the plug must not be connected backwards during installation.
At this point, the installation of Aifeite treadmill is completed. Of course, it is also necessary to adjust the height of the pedal, handlebar and display to ensure that it will be more comfortable and free to use.
In short, the installation of Aifeite treadmill is relatively simple and easy to understand, as long as you follow the instructions in the manual carefully, you don't need too much professional knowledge and experience. I hope this article can help users.