Specifications of 1. dragon: including the dragon head and the dragon tail. The dragon is smaller than 12, the dragon is larger than 13 to 29, and the dragon is larger than 30. There are certain restrictions on the number, length, number of people and musical instruments used in international competitions. Please refer to the rules of dragon dance competition. The distance between the Dragon Body Festival and the Dragon Body Festival is six to eight feet (one foot and thirty centimeters). Dragon dancing is more suitable for primary school students and junior high school students, depending on the students' figure and physical quality.
Two 1 dragon balls (interchangeable), about 20 to 30 cm in diameter.
2 a Duan Long bow, about 90 to 120 cm long (depending on the size of the dragon when making it).
The dragon body has ten sections, each section is 2 10 cm apart. The joint between the faucet and the dragon tail can be slightly longer than 240 cm.
4 Dragon tail section, about 90 to 120 cm long (depending on the size of the dragon when making).
Including the dragon head, the dragon body and the dragon tail, the total length is about 24 meters.
6 The grip is about 3 cm in diameter and 105 cm in length.
7. The joints and parts of the dragon body have six drum rings (90 cm in diameter) with a spacing of 30 cm.
Second, the production of dragons.
1, the production of dragon balls
The iron sheet (or plastic sheet) with a width of 1 cm is 75.36 cm long and forms an iron ring with a diameter of 24 cm.
Punch holes at both ends of a diameter iron ring, pass through it with thick iron wire, and add 2 cm long small tubes at both ends.
Bend the thick iron wire passing through the iron ring downward into a semicircle with a diameter of 30cm, and fix the rest on a bamboo (wood) stick with a length of105cm, and draw on the bamboo (wood) stick.
Four or six bamboo strips with a width of 1 cm and a thickness of about 0. 1 cm respectively pass through the thick iron wire and cross the iron ring; Form a bamboo circle, and the distance between the circle and the country should be equal to make it a ball.
Cut the red cloth into arc-shaped pieces and stick it on the dragon ball skeleton with resin to make red balls.
Hanging ribbons on both sides of the dragon ball (various ways can be designed) is completed.
It can also be made with modern spherical plastic, which is faster and more convenient.
2, the production of faucet
Use two wooden boards with a length of 30cm, a width of 9cm and a thickness of 1 cm, and cut a circular hole with a diameter of about 3cm in the middle of each board (one of which cannot penetrate); Take two boards with a length of 8cm, a width of 9cm and a thickness of 1cm, and nail four boards into a rectangle. Then put a bamboo or wooden stick with a length of 105cm and a diameter of 3cm through the board below (it is best to shake it with rattan) and fix it with resin, iron wire and nails (be sure to tie it tightly because the faucet is movable and easy to loosen).
Use a plastic net with a thickness of 0. 5cm, 30cm long and 94.2cm wide, enclose and fix the rectangular wooden board (the iron wire can be fastened).
A bamboo pole with a width of 0. 5cm is tied by a plastic net, bent into the front center of the cylinder, and the protruding height is about 20cm. The back end of the bamboo pole is tilted backwards, fixed on the plastic net and tied in the back center of the cylinder. Take two bamboo sticks and tie them on both sides. Tie a thin bamboo stick and a thin iron wire horizontally into a head shape, and then cover it with a plastic net.
Dragon horn (pictured) can be made of thick iron wire and cross-tied on the faucet; The dragon's nose is tied with thin wire to the height of 10 cm, and a long wire is left on each side to think it is a rolled dragon beard.
Tie two pieces of iron wire or plastic net into the shape of dragon's ears, tie them on both sides of the faucet, paint them (depending on Jinlong, Qinglong and fire dragon), and decorate the pattern with gold and silver paint.
Stick white cloth on the faucet skeleton and color it (depending on the color of golden dragon, green dragon and fire dragon), and decorate the pattern with gold and silver paint. The mouth is painted with red water lines, and the dragon horn and the faucet are different colors.
Cut it in half with a small plastic ball with a diameter of 5 cm, paint it with black eyes (flashlight is ok), cut white cloth into eyes), cut red cloth into eyebrows and cut black cloth into nostrils.
Cut out dragon teeth with corrugated paper with a thickness of 1cm (upper and lower four sharp teeth, two rows of front teeth painted white, as shown in the figure), cut into tongues with corrugated paper with a length of 35cm and a width of 12cm (painted red), and put them in longkou respectively.
Several red plastic ropes with a length of 50 cm are folded in half and tied to an iron wire, then brushed into filaments with an iron brush to think of the dragon whiskers, and finally tied to the dragon's chin.
Finally, spray it all with transparent spray paint.