Schematic diagram of sagitar rear seat cushion installation, how to install the new sagitar rear seat cover, and the installation tutorial of Volkswagen sagitar seat cover is as follows; Rear backrest: first pull out the headrest and press the movable bolt of backrest in different ways according to the different structure of the car; Then put the backrest cover well, distinguish the upper and lower parts when putting it on, and put it in a suitable position; Insert the rubber band at the bottom of the front of the backrest cover into the back of the backrest, string the rubber band from the bottom to the back and tie it with the upper rubber band, and tie the rubber band on the side with the rubber band on the side; Then, put the covered backrest flat and insert it into the headrest to install the rear backrest.
Rear seat: generally, a car in the rear seat is pulled up slightly, and the whole seat can be turned up directly, and the installation is quite simple; First, put the seat cover on the seat and adjust the position; Pull the rubber band at the front end of the rear seat from under the seat to the back and tie it with the rubber band at the back; Then tighten the rope at the back end; Then, straighten the set of seat covers and install the back seat.
How to put down the back seat of Volkswagen Sagitar, how to put down the back seat of Sagitar Volkswagen Sagitar can be put down in a ratio of 4: 6; The tilt mode can be operated by the pull ring on the headrest or by using the one-button tilt function in the trunk. Proportional tilt of the rear seat means that the backrest of the rear seat can be tilted proportionally. Relative to the overall tilt of the rear seats, the flexibility of proportional tilt is higher. Only half of the backrest can be laid down to place large items, and the part that is not laid down can still be seated.
The overall inclination of the rear seat means that the backrest of the rear seat is a whole. When pulling a large object requires more space, you can put the backrest of the back seat down to get more space. The disadvantage of putting the back seat down as a whole is that when the back seat is put down, people can't sit in the back seat.
How to disassemble the sagitar back seat? To remove the rear seat of Volkswagen sagitar, first remove all five pillows, and then put your hand into the joint between the base and backrest. Some places are stuck, so you can push them out by pressing them down with your hands. At this time, this will happen. The back is open, leaving only the front. In fact, the front is stuck by two U-shaped buckles.