First, how to install the aluminum alloy baseboard
The aluminum alloy ground wire is a personal patent product, which is characterized by comprising an aluminum alloy strip, a second aluminum alloy strip and a connector, wherein the splicing ends of the second aluminum alloy strip are respectively provided with slots, and the cross sections of the slots are U-shaped; The two ends of the connector are respectively provided with an insertion part and a second insertion part, and the insertion part and the second insertion part are inserted into the corresponding slots through the insertion ends of the slots and are respectively matched with the corresponding slots; In each slot, the upper parts of the inner walls on both sides of the slot are provided with inward protrusions, and the corresponding inserts are respectively clamped between the inner bottom surface and the protrusions of each slot. The aluminum alloy grounding wire of the utility model is simple in structure and easy to manufacture. The upper parts of the inner walls on both sides of the slot are provided with inward protrusions, and the corresponding insertion positions are respectively clamped between the inner bottom surface of the slot and the protrusions, so that the clamping ability is strong and the insertion performance is good.
1. Observe whether the corner floor and wall are flat. If it is uneven, smooth it with a spatula and clean it. Otherwise, the skirting line will bend unevenly after installation, and some will not be completely attached to the wall, leaving ugly gaps.
2. Saw a section of aluminum alloy skirting line 15 cm long, clip the buckle on the groove on the back, lean against the wall and mark the hole of the buckle, drill a hole in the wall with a special tool, and then nail it into the hole just made with plastic. Screw the buckle to the wall.
3. Installing the Yin-Yang angle is to draw a fixed point position on the wall with the Yin-Yang angle, then make a hole to nail the plastic, and then fix the Yin-Yang angle with screws.
4. Finally, measure the dimension distance of each section with a tape measure, cut out the corresponding dimension with a cutting machine, and clip it on the corresponding buckle. The length of each aluminum alloy skirting line is 3 meters. When the wall exceeds the length of the skirting line, fasteners should be installed in the middle of the interface to ensure the smoothness of the skirting line.
Second, aluminum alloy skirting board installation matters needing attention
1. The clearance between the skirting line and the floor should be less than 3mm. Please use a coin of 1 yuan. If more than 2 pieces are inserted, the gap may be too large.
2. Before laying the crural line, shovel the white cement wall first, and then lay the crural line. Pay attention to protect the crural line after paving to avoid a large amount of paint sticking to the surface of the crural line when painting or spraying. The gap between the baseboard and the floor should be less than 3mm, fortress 1 yuan coin. If more than two pieces are inserted, the gap may be too large.
3. The ratio between the skirting board and the room size. Good home improvement design should have appropriate scale and proportion, such as fat furniture for large rooms and moderate furniture for small rooms. Don't suspend the ceiling below 2.5 meters, otherwise the spatial scale will be suppressed and people's daily life will be more depressed. The height of the skirting line also has a great proportional relationship with the spatial scale. When the spacing is 2.8, the height of the skirting line is150 mm. If the space is less than 2.5m, the skirting line shall be high100 mm. The sensitivity to proportion in family decoration is learned from practical experience, and perceptual knowledge is stronger than rational knowledge, which is obvious to all. There are thousands of examples of improper proportion in Qian Qian. As long as we have a pair of experienced eyes, we will detect them one by one.
The above introduction about how to install the aluminum alloy skirting line and the matters needing attention in the installation of the aluminum alloy skirting line is introduced here for everyone. Of course, if you think what Bian Xiao introduced is inconsistent with your cognition, you can communicate with us in time, and we will know everything. Of course, I hope you can always pay attention to our program, and you can learn about any decoration matters. Thank you again for reading.