Error code:
0 15- All extended hp have no tokens. 30 1- There is no ball in the bucket. 303- The ball is stuck in the lower exit.
40 1. 403. 404- Left hp has no tokens or cards. 405.406- Medium HP Card. 408.409 slot card.
4 10- Swing machine stopped. 422- Check whether the left high pressure distribution port is blocked. 423- The bucket is stuck.
4 1 1.4 19- The sensor on the panel is stuck.
Service Mode (Instant)
Service mode: immediately
Number:-Value:-
Select the setting mode according to the specified number of service satellites (it will be quite easy to select channels by sampling). Different from the above service mode (timer), if it has been set, the service work will start immediately.
Use the selector switch (up and down symbols) to change the switch position, and then use the input switch to decide whether to go to the next item.
Number: 1 ~ Number: 6: indicates the set number of service satellites.
Initially expressed as "-",this state is expressed as a state of not carrying out related services. Quantity: 6
Numbers other than, indicating that the number of service satellites can be set randomly.
Value: 1 ~ value: 8: indicates service level. The larger the value, the easier it is to sample and select channels. Originally indicated as "-",
This state is expressed as a state in which related services are not executed.
During the setting process, once the reset button is pressed, the special menu screen will be returned.
After selecting the relevant value, just press the input switch and you will enter the confirmation screen.
Can you confirm it? otherwise
Input Quantity: 6 Value: 4
Use the selector switches (up and down symbols) to switch the affirmative/negative buttons. When "No" is selected, press the input switch; if the reset switch is pressed, it will return to the special menu screen.
When you select "Yes", once you decide to press the input switch, the following related data will be displayed immediately.
Service mode: immediately
The static erase operation ends.
If you press the reset switch, you will return to the dedicated menu screen.
Number of pictures: 22
3-5k game settings
Important button: Stop
Used for setting other than 【 saboten mechuse 】 project, which belongs to the setting of a single satellite. During maintenance, you can use the maintenance equipment to change the related settings. Mary Mac's products include: Acura 678, Enhanced Burst Gun, Acura Beauty, Leopard Legend, Jiuyin Zhen Jing, Decisive Bright Top, Happy Bar, Pistachio, aiming at changing the satellite test mode, including the assignment rate and the set value of the system.
In this machine, the allocation rate is independent for each satellite. In fact, there is no assignment rate of the whole system.
When changing the tilt mode (static), tilt sensitivity, static capacity and settings other than those used in [saboten mechuse], all instruments must be zeroed.
Game command menu screen
Game allocation: 0110
Reset the default values.
Game items can be set through appropriate changes in related software.
The game settings menu has 10.
1: Reset the default value? Initialization of settings;
2. Positioning ratio? Setting of expenditure rate;
3: Positioning control switch? Control whether there is expenditure;
4: sealed container content value? The number of medals entering the sealed container;
5: Bidding settings in sealed containers? Whether the expenditure ratio of sealed containers is fixed;
6: What is the interval between sealed containers? Set value of the number of sealed containers;
7: Tilt mode (static)? Tilt sensitivity of satellite;
8: Tilt sensitivity? Tilt sensitivity of satellite;
9: Static capacity? Sound impact on satellite and its volume;
10:Saboten Mechuse project settings? Used to set the [saboten mechuse] project. Use the selector switch (up and down symbols) to select related items, and use the input switch to set the corresponding mode.
If you press the reset switch, you can return to the test menu.
Reset the default values.
Reset the default values.
Are you sure? negate
Everything involved in {Game Command} can be restored to the factory settings.
At this time, all relevant data previously stored in the instrument will be cleared.
If the switches (up and down symbols) are selected to switch the affirmative/negative keys.
If it is negative, press the input switch, if it is reset, it will return to the game command screen.
In the affirmative, once the input switch is pressed, the corresponding settings will be confirmed and the corresponding screen will be switched.
Number of pictures: 33
Specified variable: 123456
Results: oxooxo
The number in 1 ~ 6 is the satellite number. Under it, the satellite is accurately set and changed (when communication is impossible), and when it cannot be changed and set, it means that the satellite is in the "X" state. In the case of "X" status, you must pay attention to related matters because the satellite status cannot be set correctly. Then, press the reset switch to return to the game command menu screen.
In the following other setting modes, you can perform the same operation when making a decision.
Positioning ratio
Positioning rate: 92%
Press the input switch to make a decision.
With the scale of 2%, the relevant settings can be made in the range of 70% to 1 10%. Set to 92% when shipping.
You can use this mode to set and change the expense rate. Once the relevant settings are changed, all instruments will be cleared. Payout ratio can be set to 92% at the factory. Because there are some differences between the size of medals and the technical content of athletes, they must be adjusted according to the daily payout ratio.
Positioning control switch
Positioning control switch: On
Press the input switch to make a decision.
Can be set to on or off, and can be set to on state when shipping.
This mode can be used to set whether to control expenditure. Once the relevant settings are changed, all instruments will be cleared.
Once set to on state, Mary Mike's products include: Super Bee, Super Jade Jiaolong, City Baby, Legendary Baby, Legendary Master, Popeye, Casino Storm, which can monitor the game state, control sampling selection and determine the proportion. Once it is set to the closed state, related control operations, such as four-person coin pusher, gold coast quasi-coin pusher, golden horse coin pusher, gold coin pusher, star dream coin pusher, etc., cannot be performed.
Set value of sealed container
Set value of sealed container: 20
Press the input switch to set.
With the scale of 1, you can set the relevant settings in the range of 0 to 50. Set to 20 when shipping.
This mode can set the number of medals in the sealed container. Once the relevant settings are changed, all instruments will be cleared.
Bid setting of sealed container
Bid setting in sealed container: variable quantity
Press the input switch to output the decision.
This mode can set a fixed number and a variable number. It can be set to a variable quantity when shipping.
This mode can be used to set the relationship between the number of medals put into a sealed container and the players.
Once the relevant settings are changed, all instruments will be cleared.
Once it is set as a fixed number, it is related to the number of medals invested, and once it is set as a variable, it is not related to the number of medals invested.
Number of pictures: 44
Interval arrangement of sealed containers
Bid setting in sealed container: variable quantity
Press the input switch to make a decision.
This mode can be set according to the relevant values in the article. The set value for shipment is 150.
This command mode can set the interval setting value of sealed container. Mary Mike's products are: China Bai Le, Pepsi-Cola, Mercedes-Benz 600, Bibi Wang, Ice Age, Jackfruit, Super Fuwa and Super Tricolor. Once the relevant settings are changed, all instruments will be cleared.
The effect will be better when using the command mode of {Set in Sealed Container} to make relevant settings.
This set value is the number of medals invested. The precise setting value of each medal is equivalent to the interval setting value of each sealed container.
Selectable correlation values: 100, 125, 150,175,200,250,300,350,400,500,750,100.
Tilt mode (stationary)
Tilt mode (stationary): error
Press the input switch to make a decision.
The above error indication can be set to warning mode. Set to error when shipping.
This mode can set the tilt processing mode.
When the error command is used for processing, it will become the warning mode of warning processing.
When handling the warning, an error will be given, indicating that the game can continue and the slot machine will be pushed with joy.
Setting of tilt sensitivity
Tilt sensitivity: 5
Press the input switch to make a decision.
With 1 as the unit, relevant settings can be made within the range of 1 to 10. Set to 5 when shipping.
The tilt sensing intensity of the satellite can be set in the range of 1 (sensitive) to 10 (insensitive).
Volume setting at rest
Volume setting at rest: 15
Press the input switch to make a decision.
With the scale of 1 as the unit, relevant settings can be made in the range of 0 to 15. Set to 15 when shipping.
The volume of satellite sound effects can be set from 0 (minimum) to 15 (maximum).
If you want to generate a larger volume as a whole, you can use the 1 satellite volume control device to adjust it. If you only need to increase the sound effect of the satellite and decrease its volume when using bgm, please choose a smaller value for this setting.
Item Settings for Armor-piercing Projectiles
Wood blade Mecha Use Project Settings: Definitely.
Press the input switch to make a decision.
This mode can set affirmative/negative commands. The setting at the time of shipment is a positive indication.
This mode allows you to set whether to use the wood blade Mecha to use the project.
An affirmative instruction indicates that it can be used; A negative instruction means that it cannot be used.
When the selection switch (up and down symbols) is pressed, because the set value is in a constantly changing state, when making a decision, the appropriate value can be used for setting operation through the input switch.
Due to the existence {are you sure? } prompt function, which can be the same as {reset default value}.
Number of pictures: 55
Once the reset switch is pressed and the set value remains unchanged, the game command menu screen will be returned.
Processing tilt, tilt sensitivity, satellite volume and data related to setting and changing items for saboten mech will not affect the instrument.
3-5 1 data zero setting
Important notes:
Once the master data is cleared, all satellite-related data is also cleared.
Clear data menu screen:
Clear data: 0 1/02
Clear instrument data
This mode will clear the data being backed up.
The data clearing menu always has the following two items.