1. Start to see if it can be displayed normally. If it still doesn't light up after restarting, the integration is normal, and the driver of the discrete graphics card should be damaged. 2. Press F8 to enter the safe mode to uninstall the discrete graphics card, and then install other versions of the driver.
The black screen depends on the black screen there, whether there is a self-check or boot screen. Boot completely black screen, CPU fan switch try the following methods.
Check whether the notebook power interface card is plugged in first, and then replace it with a power socket.
2. Unplug the notebook power adapter and disconnect the battery. Do not turn on the power, press and hold the ON key 15 seconds, and repeat twice.
Third, disconnect the battery and start it directly with the power interface card when not in use.
Fourth, take out the memory and illuminate the golden finger with an eraser.
Fifth, the problem remains, and it is sent for repair and testing.
Ares z7m brushes bios black screen. Ask for help. What should I do? I can only send it to be repaired. I basically have no ability to solve problems.
1. Send it to the computer shop and brush the BIOS with tools.
2. Brush BIOS for factory maintenance
Shenzhou Ares Z7S4 switches the discrete graphics card to the black screen. What should I do? 1. Start to see if it can be displayed normally. If it still doesn't light up after restarting, the integration is normal, and the driver of the discrete graphics card should be damaged.
2. Press F8 to enter the safe mode to uninstall the discrete graphics card, and then install other versions of the driver.
How to recharge the interface of Shenzhou Ares z7md 1 Boot Card Ares? Charge it with a USB flash drive. The specific operation is as follows:
Making USB flash drive startup disk
A ghost version of the win7 system image file, and save it in the prepared U disk startup disk, and change the hard disk mode to ahci mode.
U disk installation system steps:
1. Insert the U-Boot USB boot disk with the image file of win7 system into the u *** interface of the computer, and then restart the computer. When the boot screen appears, use the one-button USB flash drive to enter the main menu interface of U-boot, select 02 to execute the blue screen of U-boot win8pe (new computer), and press enter to confirm the selection.
2. After entering the win8pe system, the U startup pe installation tool will automatically open, and click the "Browse" button.
3. In the open window, find and select the win7 system image file stored in U startup disk, and then click the "Open" button.
4. Select the win7 system image file, click to select drive C as the system installation disk, and then click OK.
5. A prompt window will pop up, and click OK to continue the operation.
6. Then, wait patiently for the installation program of the image file of win7 system to be released.
Ares z7m brushes bios black screen. Ask for help. What about the black screen of the boot notebook?
First, the hardware:
1, the equipment is unstable due to poor contact between plates or collision between machines.
Boot black screen
Boot black screen
2. Too much computer dust leads to poor heat dissipation, which leads to high temperature of CPU or graphics card chip and shutdown, including hardware design defects, such as some recalled graphics cards or computer parts.
Second, the software:
1, controlled by a remote Trojan, everything in the computer is under the control of hackers.
2. Viruses or malicious plug-ins invade, causing the system to be destroyed.
3. The drivers installed in the computer are incompatible, and the computer will stop after a period of execution.
4, the compatibility of the software itself, serious conflicts and system conflicts of software incompatibility, and computer downtime.
solution
First, execute the anti-virus software that comes with the notebook, choose to scan the whole computer to clean up Trojan virus, and then use the system modification function to repair the system files damaged for various reasons. If your computer still has a blue screen, we need to analyze the dump file to determine the reason.
What is the black screen of Shenzhou z7? The black screen of single monitor is biased towards the hardware problem of the graphics card itself.
Suggestion:
1, unplug the video card to test whether the screen is black.
2. If so, reassemble the parts for testing.
3. If it is still true, it is a hardware problem. Replacement test.
4. If the video card is unplugged, it is a video card problem.
Solve how to make the z7m screen of God of War. You can reinstall the system by entering the BIOS. Your BIOS mode may be UEFI, and your USB flash drive may be in traditional mode. You can identify the boot USB flash drive by changing the boot mode back to the traditional mode.
How to break the building when the Ares Z7 starts slowly? Don't worry, rule out the hardware first, if it's not a hardware problem.
Slow boot is due to too much software running on the computer, or too much garbage and system disk.
You can open Tencent Computer Manager-Computer Acceleration-Boot Startup Item Management, and prohibit some unnecessary software.
Or use the garbage cleaning function in Tencent's computer housekeeper toolbox to clean up some unnecessary garbage.
In addition, drive C is a system disk, and there are too many files in it, which will also lead to slow boot. You can move to another drive (open Tencent Computer Butler Toolbox, mobile software).
The program of the system itself also takes up memory, so the system needs to be slimmed down and even recharged regularly.
How to solve the black screen after Shenzhou Ares z7m disables the graphics card? When starting the machine, press f8 continuously to select the last correct configuration to try.
You cannot select the installation mode yet. Delete all graphics card drivers after entering the system, and then install the graphics card drivers after restarting.
If not, you can only try the optional system.