Patch manicure tutorial, all-in-one manicure is all-in-one porcelain veneer. One-piece porcelain veneer is theoretically a permanent restoration. As long as it doesn't bite and doesn't need to be replaced, it is the first choice for many women who do manicure. Here is a patch manicure tutorial for everyone. Come in and learn together.
Patch Manicure Tutorial 1 How to Do Patch Manicure
First, trim the nail plate according to your nails, then squeeze the nail plate glue on the back of the nail plate, rotate the patch left and right to make the nail plate glue evenly distributed, and then press the back of the nail plate to the edge of your nail back at a 45-degree angle to make it match and correct the skew of the nail plate. With the midpoint between the first knuckle and the back edge of the nail as the axis, gently press the nail plate on the nail surface from back to front.
Tip: If the nail plate size is not suitable, choose a slightly larger nail plate and use a file before pasting. File it to the right size.
Manicure procedure
1, manicure, finger skin massage
2. Cut finger skin and polish nail surface
Use a sponge file to polish the nail surface. When polishing, the rear edge of nails and the front of nails should be polished neatly. If the nail surface is not smooth, nail polish is easy to fall off.
3. Clean the nail surface and apply protein adhesive.
Clean the nail surface with special cleaning liquid.
Avoid being too thin or too thick when applying protein adhesive evenly. Then light the phototherapy lamp 1 min (LED lamp for 30 seconds). The light time of protein glue should not be less than 1 min, and less than 1 min, so it cannot be dried and is easy to fall off. It won't take more than a minute. If the light irradiation time is too long, the floating glue on the surface will dry, and the floating glue on the surface can enhance the adhesion with colored nail polish.
Step 4 apply nail polish glue
Wrap the edge before smearing, sweep the bottle mouth with a brush before smearing, and then wrap the nail edge thinly. Apply nail polish glue thinly and evenly to the nail surface. When the nail polish glue is thin and uniform, it will wrinkle if it is too thick.
Illuminate the phototherapy lamp for 2 minutes (LED lamp 1 minute), and the nail polish glue must be illuminated for 2 minutes for the first time. If there is not enough time, the curing is not complete, and it is easy to tear off or edge the whole piece. If it is not dried the first time, it is easy to separate from the color of the second time.
Step 5 Apply nail polish for the second time
The method of applying nail polish for the second time is the same as that for the first time.
6. Apply the first sealing layer
Light phototherapy lamp 1 min (LED lamp for 30 seconds)
7. Apply the second sealing coating.
Light the phototherapy lamp for 2 minutes (LED lamp 1 min)
8, cleaning liquid cleaning surface
After the sealing coating is illuminated for 2 minutes, clean the surface with cleaning solution. Avoid using other cleaning liquids, because the poor cleaning effect of other cleaning liquids will affect the gloss of the sealing layer.
How to take off the patch manicure?
Tin foil unloading method
This is a common method of manicure. Just dip a thick cotton swab in nail remover, then cover it on the patch on the nail surface, then wrap it in tin foil and wait for about half an hour. When the nail has a slight burning sensation, open the tin foil and gently push off the dissolved patch with a steel push. Then gently polish it with cotton yarn strips to clean up the covering on the nail surface. The residue on the nail surface can be polished off or let it fall off by itself.
Special flux
A special sol agent appeared on the market. Dip this sol into the gap between the patch and the natural nail, and then gently tilt one end of the steel push until the patch falls off completely. However, this method still has some problems in practice. If the technology is not in place, it is easy to tear your nails.
After removing the patch, the nail surface will appear rough and dry. At this time, it is necessary to care for your nails carefully and let them recover as soon as possible.
How to maintain patch manicure
1. If it is glued, it will not be destroyed by violence and generally will not fall off. Pay more attention at ordinary times, such as wearing gloves when washing your hair and clothes, and don't rub against hard objects.
2, nail piece should not be on the nail for more than two weeks, which is not good for nail health. If it is necessary to keep the nail plate on the nail for a long time, it is best to carve some fine marks on the nail surface with a thick file before sticking the nail plate, and it is best to carve vertically on the nail surface, so as to increase the attachment area and remove the grease layer on the nail surface, but the force should not be too large and it is easy to hurt the nail.
The specific operation steps of Patch Manicure Tutorial 2 are as follows:
1. Trim the nail shape first and polish the nail surface with nail file to make the nail surface smoother.
2. Then prepare the required nail plate for later use, and apply glue on the patch, and the glue must be appropriate.
3. Stick a patch coated with glue on the middle finger, illuminate it with a lamp for 60 seconds, and stick all nails in the same way, so that the nail patch is completed.
4. Remember to clean the nail groove every day after the nail paste is finally put on, so as not to breed bacteria.
Patch manicure tutorial 3 1. First of all, you should trim your nails, cut them short, make sure that you can't see them after pasting them, then polish the shape, subtract the dead skin next to your nails, and then you can choose your nails according to your own nail shape.
2. Generally, nail plates are large and small to match hands of different sizes. Choose the nail plate that suits you according to the width of your ten nails, and then polish the nail plate to a degree that is more in line with your nail size. After this step, you can start sticking the nail board.
3. Groom the nails, glue water on the back of the nail plate, and pay attention to the amount of glue, not too much or too little. Then stick the nail plate on the edge of the nail and press it down at a 45-degree angle to squeeze out the air inside to make it stronger. Be careful not to let the fingernails tilt up. Note: After the glue dries and the nails are trimmed into the desired shape, you can draw patterns and apply nail polish on the nail plate at will. When the nail polish dries, beautiful nails will be done!