First, try to maintain the economic speed. Because any car leaves the factory with its fuel-saving index. Generally speaking, the fuel economy index of a vehicle is 90.
When the vehicle fuel is the most economical under the condition of uniform Km/h motion. In addition, the general speed limit in expressway is 120.
Below km/h, this design has its fuel-saving factors, because speeding will not only bring safety hazards, but also consume more fuel.
The second is to avoid rapid acceleration and deceleration. We often see such vehicles on the street. In traffic jams, they keep changing lanes and accelerating and decelerating, but they often can't lead much or even fall behind. Sudden acceleration and deceleration will increase a lot of fuel consumption, and will also lead to the damage and decline of vehicle performance.
The third is to avoid idling for a long time. Generally speaking, when a vehicle is driving on a city road, it can be turned off by waiting for the traffic lights for a long time. According to the characteristics of slow driving of urban roads, the throttle can be turned off predictably at the red light, and the speed can be controlled by taxiing without stopping the fire reasonably, so as to achieve the integration of vehicles, people, vehicles and roads.
The fourth is the rational use of air conditioning system. It is common sense that using air conditioners will increase fuel consumption, but there are exceptions. When the vehicle speed exceeds 85.
Km/h, opening the window to cool down will increase the huge resistance, and the fuel consumption brought by this resistance even exceeds the fuel consumption brought by turning on the air conditioner. Therefore, when driving at high speed, it is best to open the window and use the air conditioning system to cool down.
Second, usual maintenance is an important link.
The fuel consumption of driving is related to many factors. Besides the self-weight of the car, the shape of the car, the thermal power of the engine, road conditions, driving habits and so on, the car condition is also an important factor affecting the fuel consumption of the car. Therefore, we should pay attention to strengthening the maintenance of cars at ordinary times.
First of all, always check the tire pressure. Keep the tire pressure within the standard value range. Too low tire pressure will increase vehicle fuel consumption, and tire pressure that meets the specified requirements can reduce fuel consumption.
Second, change the oil regularly, pay attention to cleaning the carbon deposit and filter, and replace the spark plug in time. Dirty air and oil filters, worn spark plugs and faulty emission control systems may increase fuel consumption. In order to maintain the best performance of the car, it is best to change the oil every 5000 kilometers and check the filter.
Third, we should immediately clean up the dust and dirt around the vehicle, keep the vehicle clean and reduce the resistance of the vehicle driving at high speed.
Finally, reasonable planning of driving is the guarantee.
First, we should study more travel routes, consult experienced masters, and seek the best travel route and the most practical distance to ensure the smooth completion of the work.
Second, when the weather is hot, don't expose the vehicle to the sun, park it in a cool and ventilated place as much as possible, reduce the temperature of the vehicle, and maintain the good technical performance of the vehicle.
As office logistics drivers, we should also save every kilowatt hour, every drop of water and every piece of paper in our daily work and life, start from daily work and trivial matters, set an example and demonstrate in office energy-saving work, protect our living environment and promote the rapid and orderly development of China's economy.
As an agent logistics driver, did you do it today?