Method 1: Use the USB flash drive to start the shortcut key and directly enter the USB flash drive installation system. The shortcut key of HP notebook USB flash drive is F9. After connecting the prepared quick start USB flash drive (USB flash drive making tutorial) to the computer, restart the computer. After the brand logo appears, press F9 wildly, and a window will appear to select the startup items in sequence. Use the arrow keys on the keyboard to move the cursor to the USB flash drive startup item, which is the USB option. It should be noted that the display here may be different due to different versions. Some USB flash drives may directly display the name of the USB flash drive here, while others may display the United States. Method 2: Set the USB flash drive into the bios as the first startup item. The shortcut key for HP notebook to enter bios is ESC, and the steps for setting up USB flash drive startup are as follows: 1. First, start the computer. After pressing the ESC key, you will enter the following screen. There are several options. To enter the BIOS, please press F 10 here. 2. After entering the BIOS main interface, select SystemConfiguration, which means "System Configuration" in Chinese. If you are a friend with poor English, you can choose the language first, press enter, and select "Chinese" in the pop-up window, which is more convenient, but the following will still be explained in English interface for others to understand. 3. Still in this interface, select the BootOption, which is the "startup option" in Chinese, move the cursor to this item, and then press enter to enter. 4. After entering the BootOption submenu, come to this interface, select "BootOrder" in this interface, which means "startup command" in Chinese, and then press enter to enter the submenu, prompting that this option is different from other computers, and other computers rarely have such an option. 5. After entering the next submenu, here, you need to select the item USBDisketteonKey/USBHardDisk, and then press enter to confirm. 6. At this point, the settings have been completed, and the last thing to do is to save. In the BIOS main interface, under Exit, select Save &; ExitSetup can be saved and exited. Another method is to press F 10 to save and exit. The second method is simpler. If the confirmation window pops up, just press OK.
After that, the computer will start from the USB flash drive and enter the quick start win 10pe system. Of course, this is in the case that the USB flash drive startup item is set successfully. If everyone presses the HP notebook USB flash drive and there is no response, the USB flash drive startup item selection window will not pop up. There are generally four reasons: 1, the computer has not enabled the startup shortcut function, and you need to enter the bios to enable the startup shortcut function. 2. USB interface is not supported. Suggest changing the USB interface to try. 3.USB flash drive startup file is missing. Please refer to the Boot Item Repair Tutorial with Quick Start Software for how to repair it. 4.pe failed to load, because in the process of loading pe system, memory needs to be allocated. If the memory is insufficient, it is easy to cause the PE load to fail and the operation cannot continue. I suggest you buy a bigger memory chip and try the operation again.