1. Paper-cut wallpaper
First of all, we need to measure and cut wallpaper according to the actual size of the window, and typeset and cut wallpaper according to the shape and special design of the window. When cutting wallpaper, you need to pay attention to leaving a large margin, so as to adjust the position and size and ensure the final wall-sticking effect is more beautiful.
Apply wallpaper glue
Where wallpaper needs to be pasted, a certain thickness of wallpaper glue should be applied, and the wall surface should be evenly coated to ensure that the wallpaper glue can be completely absorbed and the firmness of pasting the wall can be guaranteed.
Paste wallpaper
After pasting wallpaper glue, put the cut wallpaper in a suitable position and gently spread it on the wall to ensure that the wallpaper is pasted well. Then use a flat scraper or similar tool to scrape the wallpaper attached to the wall gradually from the center to the outside to ensure that it can completely fit the wall. After scraping the wallpaper, be sure to dry it naturally on the wallpaper, and then cut off the excess parts with scissors.
Adjust the wall
After the bonding is completed, according to the actual size of the window, adjust the wall again and clean up the scraps of wallpaper to ensure the final effect is more perfect.
In this process, it is necessary to ensure that the wallpaper and the wall are dry, and then the wallpaper is scraped and pasted. At the same time, in the process of operation, it is necessary to ensure that the wallpaper has no wrinkles and air waves, so as to ensure that the final wall-sticking effect is more beautiful. You can paste horizontal and vertical lines on the wall before pasting it, which can better paste the directional wallpaper on the wall and make the whole pasting process simpler and faster.