High-definition picture design of tattoo advertisement poster
High-definition picture design of tattoo poster
Tattoo coloring skills
First, block processing
When the whole lip surface is colored, the upper and lower lip surfaces are divided into four areas, and each area can be divided into 2-3 pieces according to the number of needles of the eyebrow tattoo machine. When operating, each piece should be carefully and fully tattooed, and then proceed to the next piece. Note: Before making the next piece, the liquid in the needle cap must be sucked out and stained with pigment again to ensure the coloring effect.
When making a lip liner, we should take a sectional treatment, that is, divide the lip liner into several sections and transport the needles one by one. When making lip liner pens, you should always contact the coloring materials to ensure smooth color flow. If there is bleeding or pigment accumulation, you should avoid this place and replenish the needle when coloring next time.
Second, layer by layer coloring method
The length of the needle is adjusted by the expansion and contraction of the needle cap when operating the lip color. The length of the needle is exposed as 1mm in the first color, 1.5mm in the second color and 2mm in the third color. Note: When adjusting the needle, the needle must be put down with the needle cap attached to the skin, so as to ensure that the required needle length penetrates into the skin, and the needle insertion angle is 90 degrees.
Third, wear less and wear more.
It is wrong to leave the pigment on your lips for 2-3 minutes after each coloring, and then gently wipe it. It's wrong to paint the whole lip after painting it.
A decision of four or five words
Light: the operator should move lightly, and his left hand should not pull the skin hard, and his right hand should not be too heavy.
Soft: gently lift the needle, drift with the current, enter the needle at a vertical angle with the same force.
Fast: the needle should move steadily, neither fast nor slow.
Note: the needle cap is attached to the skin, so that all exposed needle lengths pierce the skin to ensure uniform coloring.