Disassembly method:
The rice belt lifts the main body from the bottom, and then the rice grains can be taken out with a little force;
Xiaomi bracelet 2 takes out the main body from the inside of the bracelet;
Mi band 3/3NFC version, mi band 4/4NFC version and Mi band 5/5NFC version:
Take off the bracelet, hold both ends of the bracelet tightly with both hands and pull hard to make a small gap between the bracelet body and the wristband slot, and push the bracelet body out of the front of the wristband with your fingers.
Please read the arrow on the back of the strap carefully before taking it off. The belt particles with arrows are detachable. Loosen the handle of the strap remover, put the strap into the watch slot, and keep the steel needle of the strap remover aligned to remove it.
A watch is an instrument worn on your wrist to tell time and display time. In English, watch comes from the word wacche in the middle ages.
Watches are usually made of leather, rubber, nylon cloth, stainless steel and other materials, and the "meter" showing time is tied on the wrist.
The manufacture and production of watches are based on a simple and witty invention, that is, "clockwork", which can tighten and store energy, slowly release energy to push the running devices and hands in the watch, and achieve the function of displaying time. This spring device in the watch is called the main spring. Watch structure A watch consists of a meter head and a strap.
Among them, the parts of the rice head include: movement, case, bottom cover, mirror, characters (often called dial), hands, handles (also called push) and order (required by some tables).
How to change the strap of a smart watch
First, we need a tool to remove the strap. This thing has two ends, one is concave for picking out ears, and the other is sharp for dredging the hole of the bandage.
If there are no tools, in fact, a screwdriver and toothpick can also replace popular science. The stick-like thing inside is called raw ear, which is the shaft on the belt. There are springs at both ends for us to put in.
Then remove the old strap. Clamp the small protrusion at one end of the raw ear with the concave end of the tool, then press the compression spring to shorten the raw ear, and we can take it out.
Then you can install a new watchband. First, open the strap. .
Put on the raw ear, press the side of the raw ear, put the raw ear in the hole on the watch, and you're done ~
Precautions for belt replacement
When buying a strap, the width of the original strap must be accurate. Note that the strap with flat interface is easier to replace. If it is convex or other shape, it may need to be customized or modified.
Note: In order to put on and take off the watch conveniently, the short section of the buckle must be placed on the upper side of the watch and the long section on the lower side, as shown in the picture of 10 floor. Otherwise, it will be awkward to operate with one hand.
About leather watchband
The strap is a consumable, so it is inevitable to change it, so if the strap cracks and tastes bad, don't force it, because it is very tangled. But we still have to work hard to make your belt age in the future.
If the new belt feels hard after you get started, don't rub it hard, which will easily break the fibers of the belt and lead to cracking. In fact, the strap will be soft after wearing it for a while.
The strap is the most waterproof, and it won't get wet if it doesn't get wet. Don't think that just because your watch is waterproof, you can just go into the water. The case is waterproof, but the strap is not. Some watchbands have a yellow waterproof layer inside, although it can avoid water, because the waterproof layer may also lose its function. The water-stained strap must be dry, otherwise it will easily produce odor. If there is an odor, you can soak it in alkali. Of course, this is the worst policy.
Due to the large amount of sweating in summer, it is recommended to replace the strap with a steel strap if possible to avoid the strap becoming obsolete. Or as little as possible, at least not too tight.
How to disassemble children's smart phone watches?
The disassembly process of the watch is as follows:
The strap and dial are easily separated.
On the back of the watch dial, in addition to some certification marks and explanatory information, the rest are mainly screw hole positions and charging interfaces.
At close range, the watch is abrupt, with only the home button on the front and no side buttons.
You can see the antenna directly after removing the cover of the dial.
The antenna adopts LDS technology and is placed on the outer layer of the watch, so the antenna signal is not easily distorted.
Further disassembly, you can see the main antenna feed point, BT feed point and GPS module.
How to change the wristband of Xiaomi Five Sports Bracelet
Mi band 6 is the latest bracelet, so is it the same as mi band 5? Is it universal? It's actually common. Let's take a look at the course of changing wristbands for mi band 6.
Is the mi band 6 wristband the same as the mi band 5 wristband?
Mi band 6 wristband and 5 universal.
How does Mi band 6 take off the strap?
1. Tighten the bracelet with both hands, stretch the bracelet to both sides, and then pick out the bracelet body.
2. Choose to continue to hold the ring to make the bracelet "pop up", or tap the ring body with your little finger while tightening.
Tip:
When taking off the bracelet, you need to be careful not to be unevenly stressed and let the bracelet fall out directly.
The above is the replacement method of mi band 6 wristband. I hope you like it. Please continue to pay attention to the script house.
Related suggestions:
How to solve the degumming of Xiaomi bracelet 2 wristband lining?
Mi is not allowed to take 6: 00. How to adjust it? Skills of adjusting time in Mi-6