Drift adjustment and mouth finding steps

1, drift adjustment and trial fishing steps of leisure crucian carp:

(1) Basic drifting steps for fishing bottom:

1, rough bottom:

Heavy lead is hung on the lead seat, and the weight of lead is greater than the buoyancy of the float. All the floats are submerged in the water. Pull the float up gradually until one eye is exposed, and the top space bean is next to the second space bean. After positioning, remember not to move the space beans at the top until the fishing is over. (At this time, you can hang up or not. )

2. Adjust your eyes:

Hang the secondary line, and pull the float down about 30 cm (remember that the distance of the float is greater than the length of the long chord+10 cm). At this time, the float should be completely immersed in the water, and gradually cut the lead skin until the required mesh is exposed (adjust the mesh).

3. The basic principles of adjusting the eyes and setting the fishing purpose of crucian carp fishing:

7-mesh soft tail drift and bait rubbing: adjust 4-5 meshes to catch about 2 meshes.

7 mesh soft tail drift bait: adjust 2.5-4 mesh to catch about 2 mesh.

Hard and thin tail rubbing bait: adjust 7-9 meshes and fish 2-3 meshes.

Hard thin tail bait: adjust 4-7 meshes and fish 2-3 meshes.

High fishing eyes, dull fishing; Fishing low, fishing spirit.

According to the weather, season, bait proportion, bait group size, fish mouth and other factors, then fine-tune and adjust the eyes:

4. Find the bottom exactly:

Move the float, adjust the distance between the position of the float seat and the positioning position of the upper space bean to be about equal to the length of the sub-line, lower the hook and rub the bait to hang a big bait ball to find the bottom (also make a nest), so that the float is exposed to the water for 2 eyes, and continue to pull up the float for 2 cm. If the float shows more than 3 meshes, it means that it has passed the bottom, and the float is pulled back to 2 cm. This action is called reverse bottom hunting, and then a bait ball of normal fishing size is hung and thrown into the water.

5. Adjustment process of trial catch

(1) There is no fish in the mouth: if you fish too hard, pull up and float for 2CM (less than 5 times in a row), and the fish that catches the upper lip for more than 2 times in a row is the right mouth. (The bell can be understood as finding the bottom incorrectly, but it is still off the bottom.)

(2) The Chinese fish is on the mouth or chin, indicating that the fishing is too dull. Pull down the float 1 cm at a time until the fish is on the upper lip for more than two times, and find a suitable mouth. (Too dull can be understood as incorrect bottom-finding, which has already passed the bottom)

(3) Grasping the bottom without a mouth: Pull the float down 15cm each time to find the water layer where the fish is located, which belongs to the category of fishing from the bottom-floating-fishing with a standard depth. It is necessary to cut the lead again and adjust the float, so that after hanging the double bait, the float is exposed for about 2 eyes.

(2) Lead fishing method:

1, scope of application: used when running water or small miscellaneous fish are hooked, and the fishing method is similar to traditional fishing.

2. Lead Operation and Bleaching Steps

(1) When there is no hook, heavy lead will come to the bottom.

(2) The float is pulled down by 20CM, and the lead skin is cut flat.

(3) The space beans on the shot put open about 5 cm.

(4) Hang the parting line, and pull up the float to expose 2-6 meshes, which can be used for fishing and expose more meshes when the current is urgent.

3. Matters needing attention in running lead fishing method

In (1) flowing water environment, try to choose large floating bodies with strong positioning ability, such as No.3 floating body in Dao Lang A 1 18.

(2) The sub-line within10cm should be as short as possible, because the lead fishing is extremely blunt, and the short sub-line can amplify the signal.

(3) To grasp the movements up and down, you can catch fish.

(4) The bait can be properly adhered.

Second, the detailed steps of leisure fishing:

1. If the floating phase only rises slowly but does not fall next time, or the floating phase only rises and then falls slowly, it can be adjusted by pulling down the floating phase. There will be no slight fish merger until there is a slow rise.

2. The drift phase only rises slowly, but there is no next decline. It is ineffective to adjust the fish eye by pulling down the float, which is mostly related to the state and size of the bait. The bait state and bait application method can be adjusted in time before inquiry and exploration.

3. If the floating phase only rises slowly, but there is no next bite, and adjusting the fish eye, adjusting the bait state and feeding the bait are all ineffective, then you can reduce the lead and find another bite until there is a simple slight bite and fish.

4. The drift can't be lowered to the set fishing target, or the top can't be dropped for a long time. After excluding factors such as inaccurate throwing and bait loss, it is mostly caused by fish interface. You can also pull down the drift adjustment or reduce the lead to find the mouth.

There are many fish in the nest, but there is still no mouth to adjust the fishing eyes. Check the hook sticking rate and atomization rate of bait. At the same time, it is necessary to check whether the fishing is too dull, whether the drift fishing and bait fall into the virtual sediment layer that the fish mouth does not admit.

6. The adjustment of fisheye dullness belongs to no mouth, and the adjustment of bait state and bait throwing method are also invalid. It can reduce lead, increase eye adjustment, increase the carrying capacity of bait, expand the range of eye adjustment, let bait have more levels to choose from at the virtual bottom, and then find bait again until there is a simple slight mouth opening, and the fish is caught.

7. After the drift rises slowly, it will suddenly stop. It belongs to the Qingming positive phase, but there are always fish that slip through the net. It is related to the state of the bait, and it is most common that the bait is too hard and too big. It is necessary to adjust the bait state and feeding method in time, and then ask questions.

8. There was a direct bite in the drifting stage, but many fish were not caught. You can pull up the drift and adjust it. You can find the standard mouth and catch fish.

Third, competitive bottom-sliding fishing.

1. Settings for adjusting eyes and fishing eyes:

Routine: Peacock feathers float with soft long tail, three eyes and one line, three eyes and one line fishing, catching one line to eat, and it is better to divide them into three grades. Adjusting 3 mesh 1 line means on-site debugging after assembling the fishing group. By increasing or decreasing the lead skin, when the hook does not sink to the bottom, only 3 meshes plus about 65,438+0 meshes are exposed to the water. Fishing with three eyes and one line is to change the position of the float after loading the bait, so that the float shows three eyes plus 1 eye. Just catching a line to eat is a signal to catch a float and lift the line when fishing.

Winter: Peacock feathers float with a soft long tail, with two eyes and one line, fishing with two eyes and one line, catching one line to eat, and it is better to divide them into three grades.

Condition 1: light bait, bait ball with normal size. When using the hook with normal size, the bottom hook falls to the bottom, and the hook lightly touches the bottom.

Condition 2: Find the bottom. .

2. Real floating signal

(1), when the pendant is in place and the hook and auxiliary line are swinging downward, the float will slowly and evenly sink. After the bottom hook is in place, the hook continues to sink, and the sinking signal of the float will slow down, which is the signal of the float itself. In this process, as long as the signal law of the float itself is destroyed, the fish will eat it. Fish fishing, although the signal is chaotic, but this signal is often very real.

(2) After the double hook is in place, the truest signal is that it floats slightly, or it is cloudy.

(3) When the hook touches the bottom, wait for one minute at most. If the fish doesn't eat the hook, gently drag it back. Note that the tail will move at a uniform speed during dragging, and strange signals can be seen during the process (some fish don't eat this "provocative" food); Or, at the end, the float will have a small next signal, indicating that the fish are rushing to eat.