1。 How to replace the font that I couldn't find?
The font that copies the name of the font you want to replace will be replaced. For example, if you open a chart and prompt that you can't find the font JD and want to replace it with hztxt.shx, you can go to the copy of hztxt.shx in the AutoCAD font folder (font) and rename it jd.shx, then put XX.shx in the font and reopen its map. When you open the map contained in JD machine, so that you have no new fonts, it will never stop you from finding the fonts you want to replace.
2。 How to remove the stubborn layer?
Method 1: Close unnecessary layers, select, copy and paste them into a new file, and these useless layers will not persist. If no layers are defined in the block, please insert other layers in the block, and then these layers will not be deleted in this way.
Method 2: Select the graph on the left, and then select File menu->; Output-> block file, so the selected part of the file, if you don't specify the block mode in these graphics layers, these layers can't be stored in the new block diagram.
Method 3: Open a CAD file, delete the layer and close it, leaving only the graphics you need to see on the surface, click File-Save As, confirm the file name, and select * in the file type column. DXF format, click Midpoint Tools-Options -DXF option in the pop-up dialog window, then check the object, click "OK", and then click Save. You can choose to save the object. If you can see or use the graphics, you can choose to save by clicking, then exit the newly saved file and open it again. You will find that you don't want the layer to disappear. /& gt； Method 4: If you use the command laytrans, you may need to delete this layer that can be mapped to layer 0. This method can delete entity objects or define other nested layers.
3。 What should I do if I encounter an abnormal error when opening an old picture and quit? /& gt； Create a graphic file in the form of a block diagram that can be inserted into an old map.
4。 The method of inserting EXCEL table in AUTOCAD.
Copy the contents in EXCEL, and then insert the explosion in CAD editing)-Paste Special) -AutoCAD Entity-OK-Select the midpoint of the insertion point.
5。 AutoCAD drawing method of inserting Word document.
You can copy AutoCAD graphics to the clipboard first, and then paste them into a Word document. It should be pointed out that since the default background color of AutoCAD is black and the background color of Word is white, firstly, the background color of AutoCAD graphics should be white (Tools-Options-Display-Color). In addition, when inserting AutoCAD graphics into Word documents, the blank edges are often too large, and the results are not satisfactory. You can use the Word image cropping function on the toolbar to crop, and the problem that the blank edge is too large can be solved.
6。 When AutoCAD graphics are inserted into WORD, it is sometimes found that the circle is a regular polygon. What should I do?
The VIEWRES command sets it larger, which can change the graphic quality.
7。 When the problem of AutoCAD graphics to WORD line width is solved.
When you need to lose weight, use a line width below 0.25; Coarse, need to set the line width greater than 0.25 (within the line greater than 0.25, when printing in Word, the printing width is greater than 0.5 mm). Note: It must be displayed in CAD. If you double-click the picture in text editing, please recheck the active line width. When the line width is required to be 0.25-0.5, please use the width set by the polyline.
8. What should I do if there is a fatal error when printing? AutoCAD XP operating system?
This is related to the use of printing in AutoCAD 2002 and later. There are many bugs in the 2000 edition besides the stamp printing function. After this function, it can be directly used in AutoCAD function of 2002 edition. There is nothing wrong with this function 98 operating system, but there are some XP system errors. Therefore, it is best not to turn on this function in XP system. Unfortunately, if you have this function turned on, leaving mistakes in the fatal printing process of AutoCAD, the only solution can be this: find the AcPltStamp.arx file in the root directory of AutoCAD, change its name or delete it, so that repeated printing will not make any mistakes, and the printing stamp function will be gone. Both the 2002 and 2004 versions of the method are effective.
9。 What are the causes of text errors in AutoCAD2002?
Be careful not to move the text size of the text lines, or there will be fatal errors in CAD. Cancel orthogonality and bypass these objects.
10。 Open the dwg file system, and the dialog box of AutoCADMessage pops up, prompting "Drawingfileisnotvalid", telling the user that the file cannot be opened. What should I do?
In this case, you can exit the open operation, then open the file menu and select the DrawingUtilities/restore command, or directly enter "restore" on the command line with the keyboard, and then enter the file to be restored in the file selection dialog box to ensure that the system starts to resume file operation.
1 1。 Use multiline text command and edit text in Word97. AutoCADR 14
The new function of multi-line text multi-line text editor provides the Windows interface and work of word processing software, and it can even use the powerful function of Word97 to edit text. This function can be used in the following ways: open the tools menu, select the preference command, pop up the preference dialog box, open the file/text editor, dictionary, and fontfilename/ text editor application/internal, double-click the internal to open the file selection dialog box, then find the WINWORD.EXE application file, click Open, and finally click OK to return. After the above settings are completed, if the user uses the MTEXT command again, the system will automatically call the text in AutoCAD and add it to the application familiar with Word97.
12.AutoCAD import Photoshop drawing method.
This is an old problem, and the solution is "virtual printing"! Let's do it step by step (for convenience, bilingual brackets are used, English version):
1, open PLOTTERMANAGER under the File menu.
2. Run the Add Printer Wizard (Add Plotter Wizard).
3. Click "Next" (below), select "My Computer" on the right to continue "Next" and enter the printer model (printer model) selection page.
4. Select "Raster File Format" in the "manufacturer" on the left, which means that the "model" on the right lists various familiar graphic formats. I am used to using JPG format, select "JFIF of independent JPEG group" and click "Next" until. Then let's see how to use it.
5, CAD drawing, we are open. Plotter … is under the File menu. In the Print dialog box, select the printer type. We just installed "JFIF of Independent JPEG Group" and added the file name and path of the generated file in "Print to File (File Collusion)" below. You can edit the graph again. Photoshop can choose the size we need in the page setup, and so can the real printer. After clicking Print, wait a few seconds to generate the chart.
Note: The default page size of the system is 1280 * 1600, which cannot meet our needs. We can customize the printer properties and the size we need.
Enjoy it! Supplement: If CAD is after 2004, there is no printer installed in the printing equipment, but there is a new "PUBLISHTOWEB JPG.pc3" printer, so you can use it directly.
6. What the teacher said makes sense. If you want to export pure black line charts, remember to change the colors of pens and numbers to the seventh color, so that you can export pure black graphics, and remember PS RGB mode, so that the images will become clear.
13。 The method of loading ACAD. PGP file, no need to restart AUTOCAD.
Type the REINIT command, check PGP, and then confirm.
14。 Restore files from backup
Graphical display of its file extension (open "My Computer" tool-Folder Options-View-Remove the check in front of the hidden known file extension); Secondly, all files should be displayed (open Tools on my computer-Folder Options-View-Hide Files and Folders-select "Show Hidden Files and Folders"); Find the backup file again (its location is in Tools-Options-File-Temporary Graphics File) and rename it ". DWG "format; Finally, the method of opening other CAD files can be opened.
15。 Solve the problem that AutoCAD2005 cannot be registered.
Delete the hiding of files and folders, and delete \ Autodesk \ Software License \ b2260000.dat of c: \ files and settings \ all users \ Application data.
16.acad.pgp file
XP: C: \ \ Files and Settings \ Your User Name \ Application
\ R 16.0 of \ Autodesk \ AutoCAD 2004 means \ CHS \ \ ACAD. PGP will do.
98: C: \ \ Windows \ Autodesk \ \ AutoCAD 2004 \ r16.0 Application data representation \ CHS \ \ ACAD PGP.
17 toolbar, what should I do? AUTOCAD is missing?
Click tools-options-configure-reset, or use the command MENULOAD, and then click browse to select ACAD. The MNC to load.
18。 How to close CAD * BAK file?
(1) tool "-"option, select the Open and Save tabs, and then select the check box before "Create backup every time you save" or "Create backup copy every time you save" in the dialog box.
(2) You can also use the command ISAVEBAK to set the ISAVEBAK system variable to 0 and set the system variable to 1. Every time you save it, you will create a "* BAK" backup file.
19。 How to adjust the coordinates of the lower left box displayed in the drawing area in AUTOCAD?
Press F6 to switch. COORDS has a system variable or one or two system variables of 0. When the fixed-point equipment is updated, the coordinate display system variable of the specified point is 1, and the coordinate display is constantly updated. When the system variable is 2, the coordinate display will be updated continuously, and the distance between the front point and the angle will be updated if necessary. BR/>； 20。 What if you don't draw a dotted line?
It is recommended to set the system variable DRAGMODE to AUTO. The system variable is open, and then drag the object you want to select. Only after that, enter in the command line that when dragging and displaying the outline of the object, drag the outline of the object without displaying it with the system variable turned off. When you drag and display the outline of an object, the system variable bit AUTO will always be displayed.
2 1 how to drag and drop the selected object into the virtual reality box, and what about the two intersections left after the selection box becomes?
BLIPMODE can turn off system variables.
22。 What happens if the command enters the command prompt dialog box?
CMDDIA system variable. The system variable is 0, and the system variable on the command line is 1, which is a dialog box.
23。 Add to AutoCAD commands and corresponding toolbar icons? BR p & gtCAD, such as CAD2004 toolbar, does not display all available commands, and users need to add them themselves.
By default, there are no multiline commands on the Drawing toolbar, and there are your own commands.
The practice is as follows:
View-> Toolbar-> On the Commands tab, select the corresponding command displayed in the window on the right side of the graph.
Then find "multi-line" and click to appear. If you don't put any existing toolbar, it will appear as a separate toolbar, otherwise it will become a toolbar.
Then, they found that as long as the "multi-line" command has no icon! It is necessary to add an icon for him.
The practice is as follows:
Drag the command without closing the custom window, click the multiline command, and select the appropriate icon in the lower right corner of the pop-up panel!
At this point, we can find that computer-aided design allows us to customize icons for each command, which makes it very easy to personalize toolbars!
Finally, to delete the command, repeat the above deletion operation, drag the command away, and then select "Yes" to confirm the request.
24。 How to CAD shortcut keys?
For CAD2002 and below, go directly to its support directory ACAD. PGP file.
CAD2004 in Tools-Customization-Editing Customization File-Program Parameters (ACAD. PGP)
25。 What should I do if the mouse click sometimes produces cross marks in AutoCAD?
Prompt for the command BLIPMODE, and enter OFF to delete it.
26。 How to control echo on the command line? CMDECHO system variable is 0 or 1.
27。 How to quickly identify system variables?
It is difficult to remember as many as 302 variables. You can check whether there is a problem with the variables in the following ways. For convenience, create a file named file 2 (it is better to be new, because all variables are default values, and you can use the problematic file without it), run SETVAR in two files respectively, and then select the listed variables. If the application generates a text, all text variables are copied to Excel, which is a different comparison variable, which can greatly reduce the time for querying variables. For example, suppose that the variable setting figure 90 ANGBASE word will rotate the variables listed in the active setvar command 90, and then copy and paste all variables into the B column of an Excel file to create a new file, and then copy and paste the variable list of the setvar command into the A column of the Excel file, with the format input file C1"= if (a1= b/kloc-0. , and then sorted in descending order by column C. Is it worth it? Is the concentration of the first column of different variables, and then analyze these variables, you will soon find that there is something wrong with the setting of ANGBASE variables.
28 files can't be expanded and used except for some common commands. /& gt； This is a widespread spread, causing Lisp programs in LAN, so that several commonly used commands cannot be used. The command block curse that can only be used in XP can be solved in two ways. First, delete the file size of ACAD. LSP and acadapp.lsp should be the same 3K, and then copying acadr 14.lsp is rated as two file names twice, plus it is difficult for you to read only. All files in the LSP directory drawn by DWG should be deleted, otherwise others may be infected. Two special antivirus programs are one kind of software.
29。 How to switch between Chinese and English menus?
In AutoCAD, at the same time, the English menu setting system is retained, which can be switched back and forth. To do this, rename the File menu and say Pacad.mnu in the AutoCAD installation directory \ \ SUPPORT subdirectory. Of course, don't forget to copy it to the acad.mnl file Pacad.mnl. * * * Chinese menu and acad are in the same directory. Mnu, and use the menu command to load Pacad. To get an English menu, use the menu command to load the ACAD menu file again.
30。 How to set the password of AUTOCAD2004 graphics?
Tools-Options-Open and Save Buttons-Security Options, set the password, and if you cancel the password, you can delete it here.
3 1。 The label is too obvious, and there is a certain distance from the picture.
Execute the DIMEXO command, and then enter a number to adjust the distance.
32。 How to map all standard annotation text styles to independent styles? You can find it at ACAD. LSP supplement: (style, Standadn and simplex.shx of VL-CMDF).
33。 How about overlapping lines?
You can use the Tools-Display Order function.
34。 How to quickly transform layers?
Select any element transformation layer, and then click the layer Toolbar-Set Layer Object as Current.
35, marking text, marking up and down the target method:
Use the multiline text editing command:
Mark: Enter 2, then select 2 and press A/B. ..
Tag: Enter 2, then select 2 and click the 1/B button.
Subscript: Type 2 2, then select 2 2 and click the a/b key.
36. What about special symbols?
Open the multi-line text editor-enter text in the rectangular box on the right-select symbols-other open the character map-select symbols. Please note that the content of the character mapping table depends on the font selected by the user in the font drop-down list.
37。 How to use the disconnect command to disconnect an object at a point?
You can enter @ at the crack command prompt and then enter the second point, so that you can break through the first point of the selected object.
& gt38。 If you choose to use the Edit command, how can I delete an element?
It is very convenient to select multiple selected primitives while holding down the Shift key under the command.
39。 ! ""Key usage.
Suppose there is a line with a known length on the screen (referring to a single-segment or multi-segment line, but it can also be a line with an unknown length) and a direction horizontal to the target angle, which requires a certain short length and direction change. The process is as follows: directly select the line to make it intersect, move the cursor to the end to shorten and activate the grip, so that this line becomes a stretched rubber band line, move the distance in the direction of the cursor line, and the line moves with the original rubber band. It is considered to be moving in the original direction, and then you can use it as a capture command, enter "the auxiliary point of the nearest capture point (near the command)", and then enter "soon (near the command)" at the prompt! XX "(XX is a specific number) and then press enter, the length of the line will change, forget it completely! " !
Graphic printing technology.
Because there is no printer installed or you want to use someone else's high-end printer to input AutoCAD drawings, you need to print AutoCAD drawings on another computer, but other computers may not have safe AutoCAD, or for various reasons (for example, graphics in AutoCAD are not displayed normally on the computer, and printing through the network is not normal, etc.). ), can't print normally, just use another computer. Then, you can start printing AutoCAD drawings on their computers into files to form printer files, and then use DOS COPY command to output printer files to printers on another computer by copying PRN/B. It should be pointed out that in order to use this function, you need to add another computer system for some printers and set it as the default printer. In addition, don't forget to add /B at the end after copying.
4 1 quality attribute query.
AutoCAD provides the query of point coordinates (ID), distance (distance) and size (area), which brings great convenience to graphic analysis. However, in practical work, it is sometimes necessary to query the quality attributes of entities. AutoCAD provides the query of entity quality attributes (quality characteristics), which can conveniently query the moment of inertia, area and center of gravity of the entity. It should be noted that curves and polylines should be used to construct closed areas. Area, and then perform quality attribute query, query the entity's inertia moment, area moment, center of gravity and other entity attributes.
42。 How to calculate the area? The previous moment of two-dimensional graphics
1 is used for simple graphics, such as rectangles and triangles. Just execute the command area (you can enter it at the command line or click the corresponding icon), prompt "Specify the first corner or [object/addition and subtraction]:" at the command line, then select the rectangle or triangle to intersect, and press enter to open the capture. AutoCAD will automatically calculate the area (area) and perimeter, and the results will be displayed on the command line.
2. For simple figures, such as circles or other broken lines, spline form two-dimensional closed figures. Execute command area. After the command prompts "Specify the first corner or [Object/Add/Decrease]:", select the object option, and you will be prompted to select the calculation graph. AutoCAD will automatically calculate the area and perimeter.
3。 For complex closed graphics composed of simple lines and arcs, the area command cannot be directly executed to calculate the area of the graphics. You must command the drawing whose area is to be calculated to be created as an area, and then execute the command area. At the command prompt, click Specify First Corner or [Object/Add/Subtract]:, select the Object option, and follow the prompts to select the newly created area graph. AutoCAD will automatically calculate the area and perimeter.
43。 How to set the width?
There are many ways to change the width of AutoCAD objects. The most common method is to draw the line width of graphic entities. That is to say, you can get different colors on the screen to draw different types of graphics according to your own needs, draw with different colors, and then set different colors and different output line widths when printing. The method is as follows: Click the File menu and select Print, or press CTRL+P to open the print/drawing configuration dialog box. Click "Pen Assignment" in "Pen Making Parameters". The "Pen Assignment" dialog box pops up, where you can specify a pen number for each color number and select an appropriate pen width. Here is how to determine the pen width. The size of the pen width is mainly determined by the decision point between the resolution of the printing device and the printing width. Will AutoCAD with the formula/use these standard values? Not value? We can freely enter the following list of minimum pen widths of commonly used printers:
& gt 1/300, suitable for HP LaserJet III printer series.
1/360 of canon BubbleJet inkjet printer series
1/600 is suitable for HP LaserJet IV series printers.
1/720 is used in the new Canon BubbleJet inkjet printer.
Understand the above reason, we can use the width of the numerical line filled in the "Pen Assignment" dialog box, such as "1/300" for one color and "2/300" for two colors. The value that the system will automatically calculate is also very small.
44。 Problem line width.
Line width Line width is absolute line width, and polysemy line width is relative width, that is to say, the print line width of graphics of any size remains the same, but the line width and print size of polysemy lines change, no matter how many times the entity is scaled, the line width remains the same, only changes with the width of the scaled polyline.
45。 Clever application of [TAB] key in AutoCAD capture function.
When you need to capture a point on an object, as long as the mouse is one or several objects, press the Tab key or some special points continuously. These objects (for example, the endpoint of a line, the vertical intersection point and the midpoint of the object, the center of rotation on the back of a quarter circle, points, cut-off points and vertical intersection points) display the required points, which you can capture by left-clicking them. It should be noted that when the mouse is near the intersection of two objects, there is one of them.
46。 Does the ellipse command generate polylines or solids?
When the PELLIPSE is 1:00 elliptical polyline, it is determined by the system variable. BR/>； 47。 Several commonly used shortcut keys.
F 1: get help.
F2: The mapping window and the text window are switched.
F3: Control whether automatic object capture is realized.
F4: Digitizer control
F5: Equal Axis Plane Switching
F6: Coordinate display on control status line F7: Grid display mode control
F8: Orthogonal Mode Control
F9: Snap mode control grid
F 10: polar axis mode control
F 1 1: object tracking control
Ctrl+B key: Gated grid capture mode control (F9)
Press Ctrl+C: copy the selected object to the clipboard.
Press Ctrl+F: to control whether to automatically capture objects (F3).
Press Ctrl+G: Grid Display Mode Control (F7)
Press Ctrl+J: repeat the previous command.
Press Ctrl+K: hyperlink
Press Ctrl+N: Create a new drawing file.
Press Ctrl+M: open the options dialog box.
CTRL+1: opens the properties dialog box.
Press Ctrl +6: Open the image data atom.
Press Ctrl+ to open the drawing file.
Press Ctrl+P: open the printing of the frame.
Press Ctrl+S: save the file.
Press Ctrl+U: polar axis mode control (F 10)
Press Ctrl+V to paste the contents of the clipboard.
Press Ctrl+W: object tracking control (F 1 1)
Press Ctrl+X: cut the selection.
Press Ctrl+Y:
Redo Ctrl+Z: Cancel the previous operation.