Wire: 100% wool (100g/200m) single strand 350g, bright silk sequined mohai double strand 160g. ***5 1 1g .
About 700 meters. A vest is so thick because it was knitted for the first time, in order to achieve the original density.
Needle: 5mm stripe weave pattern, density: 19 needles 10cm. 4.5mm stripe knitted bottom edge.
Finished product size: bust 1 10cm, 55cm from shoulder.
Overview of weaving:
1. From top to bottom
2. Knitting sequence: loop-knitted neckline ~ divided into front and back pieces, shoulder pieces and twill parts ~ loop-knitted body ~ loop-knitted hem.
3. The twill effect is obtained by adding and subtracting the number of stitches. The stitch adding methods are M 1R for the right stitch and M 1L for the left stitch of the jumper.
4. When knitting, all the side stitches: the first stitch slides over the needle and does not knit, and the last stitch goes down.
5.M 1R, M 1L, p2tog tbl, k2tog tbl, ssp tbl, ssk tbl, Baidu or a certain sound.
Weaving process:
1. Neckline: single rib stitch: 84 stitches and 5mm stitching. Weave a 6 cm twisted single rib needle. Disconnect.
2. Establish the anterior membrane:
Alignment: Turn the needle for 20 stitches, connect the knitting neckline with 43 stitches (repeat * twisting the needle, and twist the needle * to end with twisting the needle), and then turn the needle for 20 stitches. Leave the remaining 4 1 needle on the waste thread or needle. At this point, the front film has 83 stitches.
Reverse row: sew 20 stitches, repeatedly twist the lower needle, twist the upper needle * * * 2 1 time, twist the lower needle 1 needle, twist the upper needle 19 needle, and twist the lower needle 1 needle.
3. Oblique shoulder loop: Note: The two needle sleeves at the loop point are 1 needle, which are knitted together.
1 thread: side stitch, repeat * twist the lower stitch, twist the upper stitch * leave 18 stitch, weave 1 stitch, twist the lower stitch and turn over.
Line 2: Bring it back, knit and twist the single rib with 18, knit and twist with 1, and turn it over.
The third row: bring it back, weave single rib with 16 needle, weave 1 needle, unscrew the needle and turn it over.
Line 4: Bring it back, knit and twist the single rib with 16, knit and twist with 1, and turn it over.
Line 5: Bring it back, twist one tendon twice, twist the needle with 1 and turn over.
Line 6: Bring it back, twist it twice in single rib knitting, knit 1 needle, and turn the needle over.
Line 7: Bring it back, twist the single rib with 2 stitches, knit 1 loosen the needle, 1 drop the needle.
4. Weave twill:
Place the tag buckle:
1 thread (reverse side): side seam, single rib twist twice, place the marking button d, repeat * screw on the needle, screw off the needle * * * 14 times, place the marking button c, weave the first row * *17 needle (all down needle), and place the marking button b.
At this time: 5+28+ 17+28+5=83 stitches.
The second row (front side): side seam, repeatedly twist the single rib to the standard buckle B, slide over the standard buckle B, M 1R to add the needle, weave the pattern (all down needle) to the standard buckle C, M 1L to add the needle, slide over the standard buckle C, repeatedly twist the single rib to the last needle, 1 add the needle. At this time: 5+28+ 19+28+5=85 stitches.
The third row (reverse side): Side sewing: repeatedly twist the single rib to the button C, slide over the button C, weave the figure (all stitches) to the button B, slide over the button B, and repeatedly twist the single rib to the last stitch. 1 At this time, 5+28+ 19+28+5=85 stitches.
Line 4: It is the same as Line 2, with single reinforcement in the middle. After completion, 5+28+2 1+28+5=87 stitches.
Row 5: Same as row 3, single tendon in the middle picture, 5+28+2 1+28+5=87 stitches after completion.
The following lines 6-9 are repeated, counting * * * 13 times. After completion, 5+2+73+2+5=87 stitches.
Line 6: Side sewing, twice twisting needle, twisting needle, sliding over the standard buckle A, 2-needle twisting needle and 1 needle, twisting the single tendon to the standard buckle B, sliding over the standard buckle B, M 1R and adding needle, weaving the pattern to the standard buckle C, M 1L and adding needle, sliding over the standard buckle C, and adding single tendon.
2. Screw in and 1 needle (which is different from the direction of needle A), then slide the marking button D, screw in and unscrew two more needles, and put down 1 needle.
Row 7: Side needle, twist the needle twice, twist the needle downwards, slide the marking button D, repeatedly twist the needle downwards, twist the needle upwards to the front of the marking button C 1, slide the knitting needle downwards, slide the marking button C, weave the picture to the marking button B, slide the marking button B, repeatedly twist the needle downwards, and twist the needle upwards to the front of the marking button A 1, and knit 60.
Row 8: Side sewing, twice turning down the needle, turning up the needle, sliding over the standard buckle A, turning down the needle with 2 needles and 1 needle, screwing the single rib to the standard buckle B, sliding over the standard buckle B, M 1R and adding the needle, weaving the pattern to the standard buckle C, M 1L and adding the needle, sliding over the standard buckle.
2-needle twisting lowers the needle 1 needle (different from the combination direction of needle A), then slides over the marking button D, and twists the thread twice, lowering the needle 1 needle.
Line 9: Side needle, repeat * twist the upper needle, twist the lower needle *, slide over the marking button C, slide over the marking button C, weave the picture, reach the marking button B, slide over the marking button B, repeat * twist the lower needle, twist the upper needle * to the penultimate needle, 1 needle.
Repeat until there are 7 stitches left from the edge to the marking buckle B or C, and then remove the marking buckles A and D. ..
The stitches on both sides of the 7 sides continue to knit and twist the single rib, mark the buckle between B and C, continue to add needles and weave the figure. Needle frequency categories are positive plus and negative plus. * * * 7 times, 14 stitches, until there are 87 stitches between B and C, and the front film is 10 1 stitch. It ends with a negative line. Disconnect.
5. Dorsal membrane
Needle picking: the front of the back collar faces itself, 20 needles are picked from the left shoulder, 20 needles are picked from the back neckline 1 stitch, 4 1 stitch from the neckline twist, 20 needles are picked from the back neckline end 1 stitch/stitch, and 20 needles are picked from the right shoulder.
On the reverse side, weave a twisted single rib, paying attention to the same side stitch as the front piece.
Main body: In the same way as the front piece, sew 7 stitches from the edge to B, and remove the mark buttons A and D .. (the reverse thread ends).
Drop: Same as the previous film, continue to add needles in the front. The needle adding rule is once every 4 rows, and add needles in the front to the number of needles 10 1. In this way, the back piece has more threads than the front piece.
6. Loop closing: the front and rear panels are connected into a loop, and the side seams on both sides are combined into one. Twist the single rib on both sides to extend the pattern in the middle to the ideal length.
7. hem: separate the front and rear pieces or continue to knit in circles, and twist the single rib by 9cm.