Question 1: How to use a belt with only two loops (tie pants)? One end passes through two rings, and then goes back through one ring. Tightening is enough.

Question 2: How to wear a belt with two rings?

Question 3: How to tie a belt with only two loops? 1, first as shown in the figure:

2. Then separate the cut rings, put the head to be worn through the top of the belt ring, stay away from the bottom of the belt ring, and tighten it.

Question 4: How does a lady tie a knot in front of a round belt? Be casual.

Question 5: How to tie the double-loop belt? 10 first of all, the decoration of the belt is the first, and you can't carry too many items. Conciseness and ability are the characteristics of men.

Secondly, the length of the belt can not be ignored. After the belt is tied, the tail end should be between the first pair and the second pair of trousers.

Third, cowboy style clothing. When choosing a belt, men generally don't hang too many items, considering the decorative nature of the belt. Because simplicity and ability are the characteristics of men.

The length of the waistband is between the first and second trouser loops, and the width should be kept at three centimeters. If the belt is too narrow, it will lose the masculinity of men; If it is too wide, it is only suitable for casual and cowboy-style clothing.

Question 6: How to put a belt with two loops into two loops from the inside out, and then put the belt into the second loop of your last loop?

Question 7: How to describe a belt with a strip in the middle of the ring? That is, the tail of the belt enters from one side inside the metal ring and protrudes from the other semi-circular side of the metal ring. I don't understand. . .

Question 8: What's the scientific name of the ring on the belt that is used to cover the belt too long? Belt buckle?

Question 9: How can a belt with two rings pass through the belt hole before it can wrap around the waist? Hold the end of the strap without loops and pass through the two loops from the inside (the side close to the body is the inside). After separating the two rings, the belt bypasses the outer ring and passes through the second ring. Just adjust it.

Question 10: 10 How to tie the round belt of jumpsuit?