The video of the making tutorial of the cheongsam collar is as follows: The sewing tutorial of the cheongsam collar, the grip method is very easy to do, and the novice also fails zero.

The making steps of the cheongsam collar are as follows:

1, first make a rectangle on the paper, which is half the length of the front and back collar, that is, half a circle around the neck. The width is 4.8 cm, and this value ranges from 3 to 5 cm. Individuals can adjust according to the situation. The higher the width, the closer the collar is to the face and the warmer it is.

2. Find four points on the rectangle to determine the type of collar. The first one takes half of the collar from point A to point B to get point E; The second point is measured from point B to point C 1.5 cm to find point F; The third point is to measure 0.6 times CF on the bisector of c to get the g point; Measure 0.5 cm from point D to point A to get point H.

3. Connect FGH three points and EF two points with a smooth curve. Note that the curves on both sides are concave inward. Finally, the plate-making diagram of cheongsam collar is obtained by cutting.

4. Take out the cloth and fold it smoothly. Cut the prepared drawing along the scribing line, lay it flat on the cloth, and cut the front and back of the collar along the plate-making drawing. Note that the cut collar is one centimeter more than that along the plate-making diagram as a seam.

5. The outer collar should be glued to keep it straight. Interlining is very easy to iron. When ironing, you can put a piece of white paper on the surface. When ironing, press it a little hard, and you can't slide back and forth to prevent the interlining from being burnt.

6. Sew the reverse sides of the inner and outer collars together along a one-centimeter seam. Turn it over and iron it, and we'll get the cheongsam collar we want.