/thread-58 15- 1- 1 . html

The first step in buying a float is visual inspection. The method is: hold the float in your hand, put the float neck between the thumb and forefinger of the other hand, and check whether the float body is symmetrical left and right, and whether the float tip and the float foot are in a straight line when rotating. If the height and width of the floating shoulder are asymmetrical, the left and right sides of the floating body are obviously unequal, and the position where the floating tip is inserted into the floating body is not concentric, it proves that this floating fish is not a fine work. In addition, during visual inspection, it is also necessary to check whether the color eye ring of the fish drift tip is clear and whether the spacing is too large or too small. Because the floating tip of fish drift is the main reference for us to directly observe fish news, its clarity and visibility will directly affect our judgment on underwater fish news. Finally, it is necessary to check more carefully whether the floating body of the fish is uniform. Because many floats are made of two or more floating materials (such as large peacock feather floats and some reeds floats). ), the float made by this process needs to be spliced by float materials with basically the same density to ensure the stability of the float in water. When we buy this kind of float, we should pay attention to whether the color difference, grain and size of each float material are the same or roughly the same. If the contrast is too large, it means that the float may not be made of materials with the same density, which may cause the phenomenon that the buoyancy of the float in the water is not equal on both sides, which is not conducive to accurately displaying the news of weak fish.

The second step is touch detection. The method is: one hand picks up the foot of the float and rotates it gently, while the other hand holds the float with thumb, forefinger and middle finger, and slowly slides from top to bottom to feel the smoothness of the float and the fineness of the paint. High-quality floats with exquisite workmanship generally handle these small problems very well.

Rolling inspection method of float

After the preliminary appearance inspection, we will check the center of gravity.

A good float can well reflect the situation of fish, and whether the center of gravity is on the central axis of the float is very important. The inspection method is: put the float on the smooth glass counter surface of the fishing gear shop and gently stir the float by hand. If it can roll quickly and smoothly on a smooth table, and the place it passes can form a fan-shaped pattern, and there is no shaking or shaking during the rolling process, it means that this is a good float.

Choice of floating brands:

If you can't make up your mind in the face of a dazzling array of floating aquatic products, choosing a brand is often a more convenient method, especially for novices who are just interested in hanging fishing and have certain economic strength. Choosing a brand float is not something you can buy anywhere. We must pay attention to prevent some unscrupulous traders from shoddy and fooling with fake brands. According to the author's experience, choosing brand fishing tackle (including fish float) must go to a reputable formal store. In addition, the floats recommended by famous fishermen or experts or sold on the spot are generally not counterfeit.

Buy according to your own economic situation

Fishing-although there is no distinction between high and low, the economic strength of fishermen is obviously different. We pay attention to scientific and efficient fishing, but we never advocate blind consumption regardless of the actual situation. According to different economic income and different consumption concepts, it is a rational behavior to choose fishing tackle (including fish drift) reasonably.

In the army of fishing enthusiasts, working-class fishing friends account for the vast majority. Take employees of state-owned enterprises whose monthly income is 1.500 yuan as an example. It is understood that their spending power on fishing tackle is about 300 ~ 1 10,000 yuan/year. Among them, the expenditure on buying fish floats is about 50 ~ 100 yuan/year. For a new fisherman who has just started, buying a float is a one-time investment, so it may exceed 100 yuan/year. According to this consumption capacity, we suggest that salaried fishermen (mainly recreational fishing) should first consider choosing domestic high-quality products with reliable quality, exquisite workmanship but low brand effect when buying fish floats.

For those laid-off fishing friends in rural areas and towns who have unstable income sources but love fishing, in principle, it is recommended that you buy economical and practical fishing tackle, and there is no need to use family life funds for entertainment and leisure. If it is really necessary to buy, it is recommended to buy a single-package float with acceptable quality, durability and low price. Such as common reed bleaching and plastic bleaching.

For fishermen who have made small achievements in their careers, have a high enthusiasm for fishing, and are interested in competitive fishing, they should mainly avoid blindness when purchasing floats. Never buy a set of inferior products because of impulse or vague understanding, resulting in the phenomenon that "there are many floats at home, but few useful ones" and unnecessary waste. In addition, this kind of fishing friends should be more careful, beware of some so-called friends with ulterior motives who "recommend" some suggestions such as "out of print fine floats" or "the most sensitive floats" and spend a lot of money to buy some flashy floats.

Our suggestion is: according to our own fishing needs, choose high-quality products with loud brand, fine workmanship and complete functions. For the selected brands, it is best to buy them in sets to adapt to different fish and water conditions.

Hanging a special float for fishing;

Floating body: the main part of floating fish, which is the main part of floating fish to produce buoyancy. According to the different fishing requirements of fishermen, floating bodies are made into many different shapes. Such as ball type, olive type, shuttle type, water drop type, streamline type, etc.

The manufacture of floating bodies can be divided into manual grinding and machining. In the case of the same material, the buoyancy produced by hand grinding is greater than that of the machine-processed fish float, but the specifications and sizes are difficult to be unified, which is not convenient for mass production. The sizes and specifications of the floats processed by the machine are relatively uniform, and the buoyancy of each set of floats has certain rules, which is convenient for fishermen to match correctly. However, because the floating body is strongly squeezed by the fixture, it may destroy its internal fiber structure, making the buoyancy of the floating body with the same material and size slightly less than that of manual processing.

Different shapes of floating bodies will produce different sports effects when they are used. According to different fishing conditions, water conditions and tactical strategies, the shapes of floating bodies need to be selected are also different. At this point, the wooden float with convenient materials and easy processing can meet our requirements. Such as Chinese fir, reed and balsa wood.

Drift tip (also known as drift tail, drift letter, drift seedling, sight pole, etc.). ):

On the details of the upper part of the float, rings of different colors such as red, yellow, black and green are painted. It is the angler who judges whether the fish eats the hook; Whether there is bait on the hook; Whether there are important sources of information about fish. Each color ring is a floating grid and each grid is a grid. The thin black belt plays a role in separating and floating. When we set our vision and fishing purpose, we can't ignore this small area (especially when fishing small crucian carp).

The material of floating tip can be divided into solid nylon rod, glass fiber resin rod, carbon material rod and hollow plastic pipe. Commonly known as "solid float" or "hollow float". Generally speaking, solid nylon rods, glass fiber resin rods and carbon rods are easy to grind and have good hardness. Therefore, the manufactured solid bleaching tip can make the bleaching tip thinner and longer. The hollow plastic pipe lacks the above characteristics, so the hollow floating tip is shorter and thicker. But this does not mean that the hollow drift is worse than the solid drift, mainly depending on how the fisherman adjusts and uses his skills.

There are also more reasonable techniques and materials in the processing of floating-point color ring paintings. The appearance of the sliding tail and floating tip has eliminated a big worry for those fishermen who pay more attention to the idealization of fishing tackle psychologically. Of course, a smooth floating tip is a good choice for anglers.

Drift neck:

The part from the junction of the floating tip and the floating body to the widest part of the floating body is called the floating neck.

The longer the neck of the float is, the better the upper curve of the float will be, and the upward force generated in use will be easily reflected, which is beneficial to the "sick fish" with poor fishing and weak fish news and the use in winter and spring cold seasons. In order to fully reflect this feature, all these floats are equipped with slender solid floating tips. However, when the fishing news is chaotic and the wind and waves fluctuate greatly, this kind of floating does not have much advantage.

However, if the length of the floating neck is short, its floating body will certainly present a stable cone with a big top and a small bottom. This kind of float is more suitable for fishing slippery fish and controlling fish feeding at the bottom. It has less false signals and gives us some obvious decline or steady rise, and the hook rate is better than other shapes. However, things are always divided into two parts, with advantages and disadvantages. When this kind of ultra-short floating neck fish float is used for fish with weak fishing information, uncomfortable mouth opening or dare not eat boldly due to environmental influence, it is difficult to have a good fishing effect because of its slow action.

It can be seen that the evaluation index of a good performance fish float should not only consider the exquisite appearance and fine workmanship, but also pay attention to whether its floating body shape can be aimed at the corresponding fish situation. However, whether the shape of the floating body is suitable can sometimes be roughly judged by observing the length of the floating neck.

Floating shoulder:

This floating shoulder is not another floating tip. Refers to the position where the cross-sectional area of the floating body is widest. Studying the shoulder position and cross-sectional area of the float can help us find out the stability and sensitivity of the float correctly. The higher the position of the floating shoulder, the better its stability, which is more suitable for the timid and cautious small crucian carp with complicated information about catching big fish or fish in the case of heavy wind and waves.

A float with a small cross-sectional area at the shoulder is sensitive to instantaneous motion because it is less resisted by water, so it has high sensitivity. It is more suitable for catching biting, frightened, cunning and morbid "old fish".

The lower the floating shoulder position, the worse the stability, but it turns over faster and the news of floating fish is more perfect. Therefore, this kind of fish float is more suitable for use in calm water or when fishing semi-floating fish.

The sensitivity of a large cross-sectional float is much worse than that of a small one, but its calm performance can sometimes help us filter out many messy false signals. When using this kind of fish float, it is necessary to choose the occasion where the wind and waves are heavy and the counterweight is needed, and use it for mixed fish culture with "raw fishing" or excessive "clever fishing".

In addition, the shape of the floating shoulder also affects the movement of the floating fish, so we must pay attention to identification. For example, small circular arc, diamond-shaped (approximate) floating shoulders are helpful for the float to float up and down, while large circular arc, circular (pointed shoulder) and other shapes are only helpful for the float to float down and block the float from floating up to a certain extent. Therefore, understanding these characteristics of floating shoulders will definitely help us choose the right float.

Drift foot:

A small stick that connects the bottom of the float and balances the center of gravity of the whole float. Its material is relatively simple, just some nylon rods, carbon rods or bamboo sticks. But now, with the deepening of people's research on floating feet and their response to fish news, and the gradual maturity of different fish pies, there are more and more reforms aimed at floating feet. The appearance of new floating feet such as super-long, big bamboo feet, thick carbon feet, all-steel feet and semi-steel feet has indeed injected infinite vitality into the use of fish floats.

Decryption of buoy practical technology

At present, there are a variety of buoy products, but in the first 10 year, only "dharma" stood out, and "water peaks" blossomed everywhere. Although this hand-made buoy is made of different materials, the processing technology of cutting peacock feathers or reeds, cutting them into the required shapes one by one with a knife, then putting them together, inserting ready-made glass fiber rods and sticking them together is actually not complicated. However, some of the same buoys stand firm when turned over, while others stagger to filter the fish news that should have gone up. The gap between them is far more complicated than it looks. With the deepening of practice, fishermen found that a perfect buoy should have an appropriate proportion in the relationship between shape, foot and tip. Otherwise the buoy has no personality. Glass fiber reinforced plastic foot buoy: it is emphasized that the foot of a single buoy has only one function, that is, it is inserted into the buoy seat and connected with the fishing line. Reflected in the early buoys, no matter what the standard body is made of, whether it penetrates or not, glass fiber rods are used as standard feet. Now, we can judge what kind of fishing method the buoy is suitable for according to its length, thickness and weight, but 10 years ago, we all knew it according to the principle of adjusting 4 fishing and rubbing bait to catch the bottom. After the appearance of baiting, our understanding of buoys has changed: firstly, the standard body is too long, which limits shallow fishing; Secondly, the softness of glass fiber feet affects the overturning of buoys; Then there is the imbalance between the buoyancy and the center of gravity of the standard body, which causes the exaggeration or concealment of the action. As a result, the buoy has changed around the influence of the shape of the standard body and the standard foot on reflecting the fish news. What role does the foot play in the movement of the buoy? And look at the performance of the following three buoys when they pull bait up: 1. Reed "Fresh Water" No.0, standard length 120mm, shoulder width 5mm through thin carbon feet, 50 mm long; Solid tip, length110mm, 8 mesh. Used to stand up straight with almost no resistance when hitting the bottom, whether it is adjusted to 5 mesh or 3 mesh. At this time, the top of the target is out of the water about 1 mm, and then there is a short pause, and then it goes down to the fisheye at roughly the same speed. During the period, the speed of target adjustment is relatively fast, and it is slightly slower from target adjustment to fishing. When used for floating, the turning speed is constant, but the distance between the buoy and the falling body is short, and the pause time after standing upright is relatively shortened. If the fish bites the hook at this juncture, the buoy has at least three manifestations: (1) prolonged pause time; (2) from upright to inclined; (3) rapid decline. As long as the eyes are not dull and the hands are slow, these three movements can be grasped. However, this slimming buoy specially designed for "two sinking and one floating" (Helan language, "two sinking" indicator tips and feet, "one floating" indicator body) has the characteristics of fast falling speed. Because of the slender feet, it forms a strong downward inertia, so the stem cutting under the tip stops for a short time and moves slowly or hesitatingly. With this buoy, you can't catch the signal without keen vision. In order to make the slender foot buoy dive quickly and overcome the shortcoming of weak pause signal, many fishermen cut off the solid tip and replace it with a hollow tip after comparison, making the buoy structure "two floats and one sinks". In this way, the overall buoyancy of the buoy increases, the falling speed of the marker tip slows down, and it is easy to catch the pause and fall. 2. Reed "Shuifeng" 1 No.,standard length 140mm, shoulder width 6mm passing through glass fiber feet, and length 55mm; Solid tip, 130mm long, 7 orders. Glass fiber is characterized by its softness. It shakes the buoy up and down in the horizontal direction with standard feet, and the "water peak" shakes more severely than the "fairy water". The appearance and structure of the two buoys are the same, but the difference between the two buoys is that the soft long glass fiber feet turn over slowly, and the height is 9 mm after standing upright, and the red standard top is above the water, which shows that the extended standard feet have no effect on the buoyancy of the buoy. After that, the standard tip slowly descends at a uniform speed. At present, the acceleration rate of stopping Chinese fish reaches 80% under the condition of four eyes and two hooks without bait and two baits for fishing. However, in the process of adjusting the eyes to the fishing day, the news of stopping fishing disappeared, and instead, the standard half eye was raised to continue to maintain a high fishing rate. At the same time, there is a strange phenomenon: the standard tip is light and the range is small. Often 1 eye drops slightly, half a day or even a Haig. Floating is mainly the action that happens when the tip of the marker pen descends. The buoy, originally designed for bottom fishing and suitable for adjusting 4 fishing and 2 fishing, falls fast and cannot hit the fish; The reason why the fish is hit lightly is that the buoyancy of the standard body increases, and the weight of the corresponding standard foot also increases. Unfortunately, the glass fiber standard foot is too thin, and the weight obtained by extending it by 5 mm cannot balance the buoyancy increased by the diameter of the standard body 1 mm. Therefore, the top of the "fairy water" is higher than the water surface1mm, while the "water peak" is higher than the water surface. If the feet can't balance the buoyancy of the body, the buoy will go down slowly, which is not allowed when floating, because it will weaken the biting signal of the fish. 3. Soft peacock feather "Sheng" No.3, standard length 140mm, shoulder width of 5.5mm passing through glass fiber feet, and length of 50mm; Solid nib, 130mm long, 10 mesh. The shape is almost the same as that of Shuifeng 1, but the material has changed-the light feather is slightly heavier than the hollow reed; The body length is unchanged, and the shoulder width is reduced by 0.5 mm, which in turn means that the buoyancy is reduced, so the counterweight adjustment of the standard foot is shortened by 5 mm. Don't underestimate this change. The objective effect can be reflected in three aspects: (1) The same fiberglass foot becomes hard because it is shortened by 5 mm. In addition, the fiberglass rod that runs through the logo body and is integrated with the logo tip is fixed by solid feathers, so it won't bend when the drop hammer pries out of the water. (2) In the past, the feet and tips of peacock feather buoys were inserted at both ends, and there was no "backbone" in the middle. If the hook is thrown continuously, the buoy will turn over frequently, and there is oil on the water surface. The adsorption of the buoy to the water surface will delay its turning over. (3) The characteristic of peacock feather buoy is to control "disorder" and avoid jumping up and down on the standard tip caused by disorderly fish. However, some people are not used to it. They always think that the action of falling one Haig is not enough, so they change it to two sinks and one float. The falling action is not very enlarged and is easy to accept visually. A peacock feather buoy with "two floats and one sinks" is used to float for plain fishing. For example, two hooks don't bait for two days, 1 day and a half, fishing for half an eye or flat water, and some people transfer water to fish for a negative eye, focusing on the action of the tip of the fishing mark coming out of the water, which is difficult for ordinary fishermen to do. The peacock feather buoy is changed from one sinking to two sinking, and the buoyancy of the buoy body is balanced by the weight of the standard foot and the glass fiber rod passing through the buoy body. For those who are not good at adjusting the standard, but only know how to adjust 4 fishing and 2 fishing, its positive significance lies in: simplifying the standard adjustment and moving 4 fishing and 2 floating. Following the road of buoy reform, we can see that the material renewal has gone through reed, medulla tetrapanacis, paulownia, plastic, peacock feathers, EVD foaming material and fir, and it is difficult to find better materials; According to our understanding a few days ago, the streamlined shape of the standard car body cannot be changed much. The so-called innovation is nothing more than the change of length and thickness, shoulder height and shoulder width; The hollow solid tip and the semi-solid "dragon and phoenix tail" as signs of observing fish news have improved the function of buoys to a certain extent, but fishermen choose pointed buoys based on their knowledge of fish conditions and show certain tendencies because of different operating habits. For example, some people who are also fishing for small crucian carp have a deep feeling about the hollow tip. If you give him a solid pointed buoy, you can't catch fish, and you can't catch fish well. At the same time, the innovation of standard feet is also quietly going on. First of all, the material, glass fiber rod was replaced by carbon fiber rod, because the former can not be made too long, carbon fiber is light and hard, and the foot can be made very long to meet the needs of short buoy, so the glass fiber rod was eliminated. Secondly, competitive fishermen have a new understanding of the standard foot, requiring producers to change the design concept, so the bamboo stick foot rises, and there is a new concept of balancing the standard foot and shifting the center of gravity to participate in the buoy movement. Therefore, the standard foot is no longer a simple concept of inserting the buoy seat into the fishing line, but an important element to improve the buoy function, standardize and form different descending speeds. With this understanding, we have a comprehensive understanding of buoys. Prior to this, both the design concept advocated by the producer and the discussion of the buoy in the media used the ontology and tip of the buoy to explain the motion characteristics of the buoy. It is very shallow to talk about the movement of buoys without marking feet or splitting buoys, and to talk about the marking tips of buoys. The movement of the buoy can be summarized into two aspects: vertical movement is what we need; We don't need to swing horizontally. However, no matter how we avoid it, the shaking caused by current always exists objectively. If we compare the buoys with different functions, their modeling rules are all long and thin, short and floating, which can be separated at a glance, but if we want to say which buoy has strong stability, we can't do without its feet. Like the lighthouse tip, the lighthouse foot's participation in buoy movement is not isolated. What material is used for the foot of the buoy and how deep it is inserted into the body will affect the movement of the buoy. Take "Shengren" as an example. Before 1997, as many as six styles used glass fiber feet, which were later eliminated. So far, there are only two styles left: Balfir "Luo Fei" and Peacock Feather "N". From the appearance, there is no difference between the A-type standard used for priming and the Luo Fei standard, both of which are thick and long standard bodies and FRP feet. The difference is that the standard foot length of Type A is 28 mm and the standard tip length is177 mm.. The standard bottom is 40mm long and the top is 232mm long. Both of them are two-sinking and one-floating structures, but apart from the same characteristics such as strong stability and high buoyancy, the subtle difference between the length of the foot and the tip is that the tip of the target is not extended to catch the incision, but to suppress the news of floating fish after lowering the fishing height and balancing most of the buoyancy of the buoy with lead. Tilapia does leave the bottom, but the swimming layer is relatively fixed. If it wants to float, it will be at the same depth and will not cut from top to bottom like crucian carp. According to these two characteristics of tilapia, the application of buoys is as follows: when fishing bottom, adjust the target of 17 to 4 or 5 meshes to reduce the residual buoyancy; Catch 3 or 4 eyes to suppress buoyancy. In this case, the line group is dragged and touched, and the buoy reflects the news of the fish falling. Adjust the fishing time to 6 days or 7 meshes to maintain high residual buoyancy; The fish eye depends on the weight of the bait, so it doesn't need to be very accurate to recognize the downward movement. Different from the two sports modes of repeated sucking and spitting of crucian carp, the tip of the mark fluctuates, and the reaction is to raise and lower the mark. The bite of tilapia is characterized by holding its mouth, but sometimes it will raise the mark slightly, but this does not mean that the hook has entered its mouth. Northern fishermen always lose to Guangdong fishermen when fishing tilapia. One of the reasons is to use the buoy of crucian carp to guide tilapia fishing, and lift the pole when seeing the bid. Fishing tilapia is all about catching one action-falling, so when adjusting the buoy, it should be set in a relatively slow state, which is difficult to do in a buoy with a slender body and short carbon feet, because such a buoy has the characteristics of sensitively reflecting the change of bait weight; Buoys with short body and thick body are all carbon feet, and their buoyancy is relatively concentrated, so the resistance when moving downward is greater than that when moving upward, which is not suitable for fishing. The peg foot participates in the buoy movement, and the former buoy hardly reflects, while the latter buoy enhances the stability of the buoy. If these two buoys are replaced by bamboo feet or fiberglass feet, the center of gravity will move down and the ability of buoys to move up will be weakened, so it is more suitable to fish Luo Fei. Used for priming, wide shoulders, thick long body with bamboo feet, slender body with short carbon feet, thick short body with long carbon feet; Used for floating, 7 cm wide epaulettes logo, short bamboo feet, 2 ~ 2.5 mm in diameter, glass fiber feet are easy to soften at high temperature, so they are not taken seriously. When buoyancy, sensitivity and stability form a buoy, glass fiber feet are not the best choice, and it is inevitable to be replaced by bamboo feet and carbon feet. But "Saint" and Peacock Ridge N found their own way and formed their own personality in * * *. We accepted the adjustment of the buoy from 4 fishing and 2 fishing. After we changed "Taiwan fishing" and absorbed the experience of traditional fishing, the diversity of fishing gave us a new understanding of the use of buoys, so we had personalized buoys and different fishing methods. This is why * * * sees individuality in sex. There is no fixed method for fishing, but there are certain rules.

Floating adjustment in Taiwan Province fishery

1, drift adjustment under normal conditions

Under normal circumstances, the drift adjustment of Taiwan fishing is usually to adjust four eyes to catch two eyes.

Adjusting the float is carried out in two steps.

Step 1: First, put the float seat close to the lead seat, so that the length from the hook to the float marker rod is less than the depth of water. Then, in the state of empty hook, add or subtract lead pieces on the lead base to make it float out of the water for four eyes (four squares away from the floating tip). At this time, the hook and the lead seat are suspended in the middle of the water, rather than sinking at the bottom, so it is called "hanging fishing method"

At the beginning of adjustment, more lead plates should be wound on the lead plate frame. If the fish floats in the fishing spot and completely sinks into the water, it means that the lead block is too heavy. You can use scissors to cut off a little lead and try again until it floats out of the water and the position of the hook is suspended in the water, even if it meets the standard.

The second step, on the basis of adjusting the four purposes, both hooks are hooked and thrown into the fishing point, and the main line is all pressed into the water. At this time, all the floating objects will slowly sink into the water. Then move the float upward until it comes out of the water and the double hook sinks to the bottom. Even if the work of adjusting the float is completed, the hook can be started. If the fish sucks the bait, all the floating markers will sink into the water. High-quality float, if half of the bait is dissolved in water, float will float an eye in the water. If the bait is completely dissolved in the water, the float should be four eyes floating on the water, indicating that the bait has dissolved and become an empty hook floating in the water, and the bait should be replaced in time.

In general, why is it common to adjust four eyes and catch two eyes? Catch one eye with three eyes, or catch three eyes with five eyes? The answer is yes, and the next section will prove that the effects of these three modes are the same. But why use four eyes to catch two eyes? Because if you adjust five or six eyes, it will soon be over, and there is not much room for mental adjustment. Moreover, when fishing, the tail is too high above the water, which will be more affected by the wind. If you adjust three eyes, the range of fishing eyes will be small, and only one eye can be caught. If you want to adjust your spirits, you can only adjust your eyes by half.

Why do you want to catch two eyes? The word "two" is determined by the word "four", because the buoyancy generated by two eyes is similar to the weight of two small groups of double hook bait (excluding the buoyancy generated by itself). Adjust four eyes to catch two eyes, and the hook and bait are lightly grounded to ensure moderate sensitivity.

2. Drifting in special environment

Practice has proved that, under normal circumstances, the method of grasping two eyes with four eyes is the most basic adjustment method. However, with the changes of specific conditions such as fish situation, water situation and weather, in some special cases, the effect of adjusting the four eyes to catch two eyes is not necessarily ideal and needs to be readjusted. For example, when the air pressure is low, the water quality is poor, the fish is full or has a bad appetite, and the foraging action is slow and slight, the bait is often eaten up, and the float may not respond obviously, so it is necessary to adjust the float more sensitively.

On the other hand, if the weather is fine, the water conditions are good, the fish have a good appetite, or there are many small fish scrambling to find food, and the floating response is very sensitive. Even the impact of the fish swimming on the water will make the bait move, and the fish will react before biting the hook, so that no fish will be caught from the pole, so it is necessary to slow down the floating speed.

The adjusted eye number can make the floating response sensitive or dull, and the captured eye number can also make the floating response sensitive or dull. In this way, in addition to adjusting the benchmark of four eyes and two eyes, there may be four different adjustment methods: 1, adjusting the spirit and grasping the spirit; 2, the spirit is dull; 3. Stupid fishing spirit; 4. blunt fishing.

Formally and theoretically, these methods exist, but from the actual effect and function, some methods have no practical significance, and forced copying will complicate the operation and become ineffective labor. Now based on the adjustment of four eyes and two eyes, the analysis is as follows:

(1) Diao Ling Diao Ling

Increase the number of nets and reduce the number of nets. For example, adjusting the five eyes to catch a glimpse will make the floating reaction more effective.

(2) Blunt adjustment and blunt fishing

Reduce the number of nets and increase the number of nets. For example, adjust three eyes to catch three eyes, so that the floating response will be slower.

(3) adjust the spirit, insipid fishing.

Increase the number of eye adjustments and increase the number of fishing eyes. For example, adjusting five eyes to catch three eyes, one spirit and one dullness, the same amount, cancel each other out. Compared with adjusting four eyes to catch two eyes, the effect is the same except that the tail rises above the water. If we blindly change the adjustment of four eyes to five eyes to catch three eyes, it will become unnecessary and ineffective labor. In fact, in order to achieve this effect, there is no need to change the weight of the lead pendant at all, that is, there is no need to change the number of adjusted eyes. Just stroke the space bean to float up, catch three eyes and adjust four eyes. There is no need to ask for trouble at all.