1, the popularity of electric heaters stems from its many advantages: because electricity is clean energy, convection electric heaters have no emissions, no pollution, no noise and outstanding environmental protection;

2. Easy to use, it can be heated when power is on, and stopped when power is off. Even in the north with central heating, electric heating can also assist heating. Some smart models can also set the temperature regularly and move freely in each room;

Disadvantages of electric water heating radiator:

1, high power consumption, at least 800w, and at most 3000w;

2. The internal heating elements of some electric heaters have a high temperature, which is likely to cause danger if they are improperly kept during use.

Advantages of carbon crystal radiator:

Carbon crystal radiator has high comfort.

Carbon crystal low temperature radiation heating system is a product with far infrared low temperature radiation as the main energy transfer mode. Experiments show that the real temperature of human body is 2-3℃ higher than the indoor air temperature when exposed to low-temperature radiation environment, just like exposure to sunlight, thus improving the comfort of living environment.

Disadvantages of carbon crystal heater:

Although carbon crystal electric heater is the highest-end electric heater at present, it still has some shortcomings. Compared with the small sun, the carbon crystal electric heater is not as concentrated as the small sun. The little sun shines directly into a place and is concentrated in this place.

Extended data:

Radiator maintenance:

1. Try to keep a certain cooling space near the indoor radiator. Don't pile up sundries on or in front of the radiator, otherwise it will affect the heat dissipation effect of the radiator.

2. Don't switch the valve on the heating pipe at will. When the heating system starts for the first time, it usually needs debugging. Specifically, every household should adjust the valve of each riser to a suitable position and open the manual bleeder valve of each radiator.

Exhaust the air collected in the radiators, or open the exhaust valve of the gas collecting tank installed at the top of the system until each radiator is heated and debugging is completed. Once the debugging is completed, the valve should be fixed and cannot be opened or closed at will.

The radiator can't be changed at will. The radiator is installed in a position conducive to indoor heating, which can ensure air convection and indoor relative average temperature. Once the location is changed, the indoor temperature will be unbalanced. On the other hand, once the pipes and radiators are moved, they will easily leak water, causing unnecessary losses to the home.

Baidu encyclopedia-electric heater