The driver's seat of Volkswagen Santana has three seat adjustment switches: seat front and rear adjustment, height adjustment and backrest adjustment, which are located on the left side of the seat cushion. In addition, Volkswagen Santana can't be discharged.

Volkswagen Santana front seat adjustment

1 Pull the backrest switch, adjust the backrest with waist strength, and release the switch when it reaches the required position.

2 Height adjustment switch: Lift up to raise the seat height, and press down to lower the seat height.

3 Position adjustment before and after: Pull the bow under the seat, move the seat with hip strength, and let go where necessary.

Installing front headrest

1. Align the headrest guide rod with the guide tube on the corresponding seat back, and then insert it into the guide tube.

2. After inserting the headrest, the installation is completed.

3. Adjust the headrest according to the correct sitting posture.

Removing front headrest

1. When the headrest is inconvenient to remove, the seat position can be adjusted.

2. Move the headrest to the end.

3. Find the lock button on the seat back, and then pull out the headrest.

Installing rear headrest

1. Put it behind the back seat.

2. Place the headrest on the headrest guide correctly, and then insert it into the guide of the corresponding seat back.

3. Press and hold the button 2 to move the headrest downward.

4. Turn the seat back of the rear seat backwards and lock it reliably.

5. Adjust the headrest.

Removing rear headrest

1. Put it behind the back seat.

2. Move the headrest to the end.

3. Press the car key on the groove of the lock.

4. Hold the car key or screwdriver in the direction of arrow.

5. Pull out the headrest when pressing button 2.

6. Reset the back of the rear seat.