Moxibustion instrument originated from ancient moxibustion therapy in China. It overcomes the problems of unsafe smoke, fire and pollution and troublesome manual operation in traditional moxibustion, and achieves smokeless, fireless and pollution-free. It is controlled by modern electronic equipment, which is convenient to use and high in safety. It is a milestone in the history of moxibustion. This instrument uses the meridian principle of traditional Chinese medicine to release the Chinese herbal medicine wormwood oil through the way of electric heating wormwood cake, which acts on the human body through meridians and acupoints to achieve the effects of eliminating dampness, dispelling cold, nourishing qi and blood and warming meridians.

Tools/Materials Moxibustion Apparatus, Ai Bing, Grass Essential Oil.

0 1 Buy an moxibustion instrument online, assemble it (when assembling, remember that the head and the base are in the same direction, and the screws of the base must be tightened, otherwise it will easily fall off or shake), open the head and rotate the back cover, and buckle out the moxibustion box top cover.

Take out the moxa cake with tweezers, put it into the heater, and point the hole on the moxa cake down to the post on the heater to keep good contact. (An Ai cake can only be used for 60 minutes)

Put the heat insulation cover into the groove, and then close the rotating cover.

Pour a few drops of Cao essential oil into the palm of your hand and massage the points to be moxibustion clockwise for 3-5 minutes to achieve the best effect.

Plug the power cord into the power socket and turn on the main power switch. Press the power button on the control panel to start the instrument. The heating temperature of the instrument is 165- 180℃ (in the sense of temperature, it is only slightly scalded). The moxibustion time can be set to 30 minutes or 60 minutes (if a moxa cake can be used twice every 30 minutes, then a moxa cake can only be used once every 60 minutes).

Start the infrared physiotherapy (you can turn on the direction of the LED infrared light after the equipment is started, otherwise the light will not light up), after preheating for 3-5 minutes, the fan will start and hot air will be blown out from the moxibustion head.

Adjust the height of the instrument by rotating the external connector (gently lift the pole with one hand and press the "press" logo button at the connector with the other hand to adjust it freely). The energy skirt falls vertically to cover the moxibustion part of the human body to achieve the best effect. (You don't need an energy skirt when you moxibustion the head or neck points)

After the set time of moxibustion is over, continue moxibustion for 3-5 minutes (hot air still comes out during this process), unplug the power plug, cool it to room temperature and keep it properly. Don't cover the nose with any clothes, cotton-padded jacket, etc. During use, and don't leave during use.

Special reminder is that this product cannot be used in places with high humidity, flammability, explosion and ash.

If the instrument is used for a long time, the temperature of moxibustion head will be higher, so beware of scalding.

When adjusting the height, don't use too much force to avoid reducing the service life of the joint.