Rong Hui logo points out that the installation method of logo can be subdivided according to the different installation basis and manufacturing technology. The following are eight correct installation methods commonly used for logo signs.
Eight Correct Installation Methods of Identification Signs
1. Installation method of adhesive sign
This method is widely used, including glass glue, AB glue, foam glue, all-purpose glue, sponge glue, double-sided adhesive, chloroform, structural glue and so on. Appropriate adhesives should be selected according to the different materials and foundations, the length of use, the difference of installation environment, indoor and outdoor humidity, temperature difference and other conditions.
2. Signboard installation method: prosthetic hanging type
This is also used for some creases, such as when the wall base is marble, glass, stainless steel, etc. , but also strong and flat, more suitable for this method. First, measure the position, stick the organic edge strip or angle aluminum and other materials on the wall with AB glue, then hang the logo hem, fine-tune the position, and fix it with glass glue.
Third, the hanging and fixing method of sign installation.
This is a way of wrapping logos, which is bulky and heavy, and cannot be installed by filling and pasting with foam. Firstly, determine the punching point, punch the hole with an impact drill, and nail the rubber plug and self-tapping screw. When only 1 screw is used, a hole must be punched in the middle of the upper edge of the logo board to keep it horizontal, and then the logo hem should be hung on the screw, the position should be adjusted, and the glass glue should be sealed around it to fix it.
4. Installation method of signboard Fixation of decorative screws
This method is designed in advance, and the design draft has clearly stated that this method is generally used to draw acrylic plate clips, mainly because the positioning of screws must be accurate, otherwise it cannot be installed correctly.
Verb (abbreviation of verb) signboard installation method: fixed pop screw
This method is suitable for situations where the ground foundation is concrete structure and the signs do not need to be moved, such as road signs and parking lot signs.
Six, hanging sign installation method.
The main materials used in this way are chains, steel cables, fishing lines and cable ties. According to the indoor and outdoor environment, sign production weight and other special requirements, appropriate hoisting materials shall be adopted.
Seven, floor-standing sign installation method.
According to the design requirements, signs can be placed in corresponding positions.
Eight, landfill sign installation method.
Applicable to the situation that the ground is of soil structure and the sign does not need to be moved. According to the size and height of the sign, determine how much concrete will be used to dig the pit. Pay attention to the surrounding environment during construction. After the signboard is buried, the site should be cleaned, flowers and plants should be restored and watered, and it should not be damaged.
I believe that after understanding the above methods, you will certainly gain something. The installation method of sign production is not fixed, but depends on the actual installation situation, and sometimes it needs to be combined with various methods to better complete the installation process of sign production.
Xi Anronghui Logo sign production Factory is a "one-stop" professional signage system manufacturer integrating the planning, design, production and installation of logo-oriented systems. Warmly welcome people from all walks of life to visit the factory.