Bama Huifu Chinese Medicine Village is located in Bama, the hometown of longevity in the world. In order to better sort out and excavate the essence of Zhuang Yao traditional Chinese medicine, and provide a platform for the inheritors of ethnic medical physiotherapy to develop and display their ancestral stunts, Bama Huifu Chinese Medicine Village was built on the shore of Qifu Lake to provide a slow-paced rural living environment for tourists, with tourism, residence, medicine and nursing as the main development ideas. Bama Huifu Chinese Medicine Village is located in the east of Bama County. Its population distribution is mainly Zhuang Yao, with simple folk customs, pleasant climate and beautiful natural scenery. In addition, water sports and leisure activities, outdoor quality development projects. To turn Bama Huifu Chinese Medicine Village into a veritable exclusive health base for life medical treatment.
Bama is very remote. There are no airports and trains, and the only means of transportation to Bama is by car. Therefore, if you want to travel to Bama Huifu Chinese Medicine Village for health, you can only go to the surrounding cities by train or plane.
If you arrive in Nanning by plane or train. If you get off the plane at the airport, there will be a direct bus to Bama at the airport exit. You can get on the bus and drive directly to Bama.
If you get off at Nanning Railway Station, then you come to the exit of the railway station, and there are buses to Xixiangtang bus stations 200 meters to the right of the exit. There are four or five bus stations in Nanning, and every bus station has a bus for Bama. Every bus stop is about ten kilometers away from the railway station, so I didn't say it was closer. However, some bus stations have more flights to Bama, such as Xixiangtang Bus Terminal. There are Anji bus terminal, Jiangnan bus terminal, Langdong bus terminal and so on. At present, the bus Z from Nanning to Bama takes four and a half hours. If you arrive in Nanning too late, you can rest for one night and start again the next day. The fare is *** 120 yuan, and the departure time is from 7 am to 6 pm, with an average of about 1 hour.
Bama Huifu Chinese Medicine Village is located in Poletun, Cifu Village, Bama County.
Self-driving: Starting from Bama County, drive about 8 kilometers to Jin Chengjiang, turn left at the intersection of Wisdom Fofo Agbo Middle School, drive 2 kilometers along the road around the lake, and arrive at Cifu Lake Scenic Area in Bama Huifu Traditional Chinese Medicine Village.
Public transportation: From Bama Bus Terminal, take the Bama-Phoenix shuttle bus and get off at the intersection of Wisdom Fofo Agbo Middle School, and walk 2KM along the road around the lake to reach the Cifu Lake Scenic Area of Bama Huifu Chinese Medicine Village (Bama County is directly connected, and it is free to reach Bama Huifu Chinese Medicine Village).
After arriving in Bama, many people choose to rent a house in Xiaozhuang Village of Bama for long-term health preservation, or visit various scenic spots in Bama County by car or chartered car, or live in Huifu Traditional Chinese Medicine Village of Bama, where tourists stay for ten days or months. Most of them are rented houses, and the price ranges from 750 to 1500 per month. Many people came to Bama Huifu Chinese Medicine Village to explore the secret of longevity, so a group of "migratory birds" were born.
Question 2: How many kilometers is the driving route from Hubei Public Security Bureau to Nanning, Guangxi? The whole journey is about 1234.8 km.
Starting point: Gongan County
1. Jingzhou driving plan
1) Start south from the starting point, drive along Qingnian Road for 40 meters, and turn right into Youjiang Road.
2) Drive along Youjiang Road 1.3km and go straight into G207.
3) Drive along G207 for 5.9 kilometers, turn right slightly and get on the ramp.
2. Drive along the ramp 1.4km and go straight into Erguang Expressway.
3. Drive along Erguang Expressway for 3 1.8km and go straight into Erguang Expressway.
4. Drive along Erguang Expressway for 20 meters and go straight into G207.
5. Drive along G207120m, and go straight into JD.COM connecting line.
6. Drive along JD.COM connecting line 4. 1km, turn left slightly and enter Erguang Expressway.
7. Drive along Erguang Expressway for 90 meters and go straight into Erguang Expressway.
8. Drive along Erguang Expressway for 8 1.5km, and then turn right slightly on the ramp towards Zhangjiajie/Changde North/Taiyangshan /G55 13.
9. Drive along the ramp for 430 meters and go straight into Hangrui Expressway.
10. Drive along Hangrui Expressway for 262.7 kilometers, drive in the direction of Fenghuang/Huaihua/Guangzhou/Ruili, and turn right slightly to enter Hangrui Expressway.
1 1. Drive along Hangrui Expressway for 960m and go straight into Baomao Expressway.
12. Drive along Baomao Expressway for 34.3km, drive in the direction of Fenghuang/Tongren /G209, and turn right slightly to enter Hangrui Expressway.
13. Drive along Hangrui Expressway for 630m and go straight into Hangrui Expressway.
14. Drive along Hangrui Expressway for 62.5km, heading for Tongren South/Guiyang, turn right slightly and get on the ramp.
15. Drive along the ramp for 750 meters and go straight into Tongyu Expressway.
16. Drive along Tongyu Expressway for 56.9 kilometers, heading for Kaili/Guiyang, turn right slightly and get on the ramp.
17. Drive along the ramp for 330 meters and go straight into Shanghai-Kunming Expressway.
18. Drive along Shanghai-Kunming Expressway 195.8km, cross the Jiajiayan River Bridge, and turn right slightly in the direction of Duyun/Guangxi.
19. Drive along the ramp for 780m and go straight into the Blue Ocean expressway.
20. Drive along the Blue Ocean Expressway for 264.8km, drive in the direction of Du 'an/Nanning /G75, turn right slightly and enter the Blue Ocean Expressway.
2 1. Drive along Blue Ocean expressway for 7 10 meters and go straight into Blue Ocean expressway.
22. Drive along the Blue Ocean Expressway for 2 10.9 km, cross the overpass bridge of Anji Toll Station, and go straight into the Blue Ocean Expressway.
23. Drive along the Blue Ocean Expressway for 440 meters, drive towards Xiudao/South China City, and then turn right into Anji Avenue.
24. Nanning driving scheme
1) Drive along Anji Avenue for 3.8km, cross Youai overpass for about150m, and go straight into Youai North Road.
2) Drive along Youai North Road 1.7km, pass through Building 9 of Youai North Road on the right, and go straight into Youai South Road.
3) Drive 2.2km along Youai South Road, cross Youai Bridge and turn right into Renmin East Road.
4) Drive along Renmin East Road for 370 meters. After passing through Tongyin Building on the right for about 270 meters, turn left and enter Chaoyang Road.
5) Drive along Chaoyang Road for 530m, cross the pedestrian plaza on the right for about150m, and then turn right into Quan Min Road.
6) Drive 200 meters along Quan Min Road, cross the Jiang Bin overpass, drive in the direction of Yongjiang Bridge, and go straight into the Avenue of Stars.
7) Drive along the Avenue of Stars 1.5km and go straight into the Avenue of Stars.
8) Drive along the Avenue of Stars 140m, take the fourth exit and turn left into the Avenue of Stars.
9) Drive along the Avenue of Stars for 3.9 kilometers and turn right.
10) Drive 100 meters to the finish line (on the right side of the road).
End point: Nanning, Guangxi Province
Question 3: Which province does Hubei pass through to Guangdong? Which province does Hubei pass through to Guangxi? Do they all pass through Zhejiang Province? Is it far from Guangdong to Guangxi? How long will it take? Hubei-Guangdong passes through Hunan Province. Hubei-Guangxi passes through Hunan Province. None of them pass through Zhejiang Province. The border between Guangdong and Guangxi.
Question 4: How many kilometers is the driving route from Wuhan, Hubei to Liwan, Guangxi? The whole journey is about 99 1.9 km.
Starting point: Wuhan
1. Wuhan city driving plan
1) Start from the starting point, drive southeast for 30 meters, and turn right into Jiang Yan Road.
2) Drive along Jiang Yan Road for 660m, pass the old site of Jiang Yan Road 163 on the right, and turn right into Lihuangpi Road.
3) Drive along Li Huangpi Road for 2 10 meters and turn left into Dongting Street.
4) Drive along Dongting Street for 20 meters, cross the former site of Luo Hui Company on the right and turn right into Poyang Street.
5) Drive along Poyang Street for 660 meters, pass through Dongting Village on the left for about 70 meters, and then turn right into Nanjing Road.
6) Drive along Nanjing Road160m and turn right into Shengli Street.
7) Drive along Shengli Street 180m and go straight into Wuhan Yangtze River Tunnel.
8) Drive along Wuhan Yangtze River Tunnel 140m, turn right ahead and enter Wuhan Yangtze River Tunnel.
9) Drive along Wuhan Yangtze River Tunnel for 2.8km, drive towards Youyi Avenue/Zhongshan Road, turn right slightly and enter Hu Sha overpass.
10) Drive along Hu Sha overpass for 330m and go straight into Youyi Avenue.
1 1) Drive along Youyi Avenue for 2.0km and turn left slightly into Zhongshan Road.
12) Drive along Zhongshan Road for 3.0km, head for Baishazhou Avenue/Baishazhou Bridge, and go straight into Baishazhou Avenue.
13) Drive along Baishazhou Avenue 1 1.6km, turn right slightly in the direction of G4/s1/G50, and enter Zheng Qing Expressway.
14) Drive along Zheng Qing Expressway 170 meters and go straight into Zheng Qing Expressway.
15) Drive along Zheng Qing Expressway 1 1.4km, and go straight on the ramp.
2. Drive along the ramp for 3. 1km and go straight into Beijing-Hong Kong-Macao Expressway.
3. Drive along the Beijing-Hong Kong-Macao Expressway for 647.7km, cross the Orfila Bridge for about1.8km, and then go straight into Leguang Expressway.
4. Drive along Leguang Expressway for 263.9 kilometers and go straight into Daguang Expressway.
5. Drive along Daguang Expressway 16.7km and go straight into Guangzhou Airport Expressway.
6. Guangzhou City Driving Plan
1) Drive along Guangzhou Airport Expressway 15.9 km, cross Jixiang Building on the left, head for Inner Ring Road/Guang Yuan West Road/Sanyuanli/Tianhe District, and turn left slightly on the ramp.
2) Drive along the ramp for 220 meters, pass the business center of Vienna International Hotel (Sanyuanli Store) on the right for about 80 meters, turn right in the direction of Inner Ring Road/Guangyuan West Road/Sanyuanli, and enter the airport expressway.
3) Drive along the airport expressway for 2. 1 km, cross the AVIC Building on the right, go to the Inner Ring Road (Line A)/Dongfeng West Road/Zhujiang Tunnel/Ren Minqiao, turn right slightly and get on the ramp.
4) Drive along the ramp for 30 meters, pass Jiaxing International Trade City on the right for about 370 meters, then turn right ahead and enter the Inner Ring Road.
5) Drive along the inner ring road for 2.2km, pass Chengqi Building on the right, exit at Zhujiang Bridge/Fangcun/Guangfo Highway/Huancheng Expressway (West Ring Road), turn right slightly and enter Shuangqiao Road.
6) Drive along Shuangqiao Road for 360m and go straight into Shuangqiao Road.
7) Drive along Shuangqiao Road 2. 1km, drive in the direction of Fangcun Avenue West (westbound)/Guangfo Highway/Pearl River Etan Bay/Kou Bus Station, and turn right slightly to enter Zhujiang River Bridge.
8) Drive 4 10 meters along the Zhujiang River Bridge, turn right ahead and enter Fangcun Avenue West.
9) Drive along Fangcun Avenue West for 3 10/0m, pass the exhibition office building of Longwan 392 on the right for about190m, and reach the destination (on the right side of the road).
End point: Guangxi Xieji gourmet
Question 5: How many kilometers is it from Guangxi to Shiyan, Hubei? Distance from Nanning, Guangxi to Shiyan, Hubei1482km. You can take a train or a bullet train or an airplane.
Question 6: How many kilometers is the driving route from Guangxi to Guangshui, Hubei? The whole journey is about 1348.438+0 km.
Starting point: Guangxi Zhuang Autonomous Region
1. Driving plan of Guangxi Zhuang Autonomous Region
1) Depart due south from the starting point, drive for 20 meters, and turn left into Minsheng Road.
2) Drive along Minsheng Road for 90 meters and turn right into Xinmin Road.
3) Drive 340 meters along Xinmin Road, cross Xinmin Overpass and turn right into Xinmin Overpass.
4) Drive along Xinmin overpass 170 meters, cross Xinmin overpass and turn right into Minzu Avenue.
5) Drive 9.8km along Minzu Avenue and go straight into Quannan Expressway.
2. Drive along Quannan Expressway 140m, turn right slightly in the direction of Liuzhou/Wuzhou /G72/G80 and enter Quannan Expressway.
3. Drive 356.9 kilometers along Quannan Expressway and go straight into Guilin Ring Expressway.
4. Drive along Guilin Ring Expressway for 26.8km, heading for Lingui New District/Longsheng/Xing 'an/Quanzhou, and turn right slightly on the ramp.
5. Drive along the ramp for 950 meters and go straight into Quannan Expressway.
6. Drive along Quannan Expressway for 322.5km, drive in the direction of Beijing/Changsha, turn right slightly and get on the ramp.
7. Drive along the ramp for 930 meters and go straight into the Beijing-Hong Kong-Macao Expressway.
8. Drive along Beijing-Hong Kong-Macao Expressway for 459.2km, and go straight into Wuhan Ring Expressway.
9. Drive along Wuhan Ring Expressway for 48.0km, drive towards Beijing /G4, and turn right slightly to enter Beijing-Hong Kong-Macao Expressway.
10. Drive along Beijing-Hong Kong-Macao Expressway for 86.2km, then turn right slightly, and take the ramp to Suizhou/Guangshui /S28.
1 1. Follow the ramp 1.7km and go straight into Ma 'an Expressway.
12. Drive along Ma 'an Expressway for 25.8km, exit Guangshui/Changling /S304, turn right slightly and get on the ramp.
13. Drive along the ramp for 450m, and then go straight.
14. Suizhou driving plan
1) Drive 5.4 kilometers and go straight into Yingbin Avenue.
2) Drive along Yingbin Avenue for 320 meters and go straight into Yingbin Avenue.
3) Drive along Yingbin Avenue for140m, pass the right light industry department store for about110m, and turn left at the third exit into Yongyang Avenue.
4) Drive along Yongyang Avenue 1.0km, cross Kyoto Furniture Expo Center on the right, go to East Street, and go straight into East Street.
5) Drive along East Street for 600 meters, turn right slightly and enter Zhengdong Street.
6) Drive along Zhengdong Street for 50 meters, cross Yintai Square on the left for about 270 meters, and then turn right into Fu Qian Street.
7) Drive along Fu Qian Street130m to the destination (on the left side of the road).
End point: Guangshui City
Question 7: How many kilometers is Jingzhou, Hubei Province from Beihai, Guangxi? Which cities have you visited? Driving route: the whole journey is about 1379.9 km.
Cities include Changde, Yiyang, Changsha, Xiangtan, Hengyang, Hezhou, Wuzhou and Yulin.
Starting point: Jingzhou City
1. Jingzhou driving plan
1) Depart from the starting point to the northwest, drive along Jinxi Road along the river for 230m, and enter Taiyue Road.
2) Drive along Taiyue Road 1.3km, turn right slightly and get on the ramp.
2. Drive along the ramp for 4 10 meters and go straight into Erguang Expressway.
3. Drive along Erguang Expressway 63. 1km and go straight into Erguang Expressway.
4. Drive along Erguang Expressway for 20 meters and go straight into G207.
5. Drive along G207120m, and go straight into JD.COM connecting line.
6. Drive along JD.COM connecting line 4. 1km, turn left slightly and enter Erguang Expressway.
7. Drive along Erguang Expressway for 90 meters and go straight into Erguang Expressway.
8. Drive along Erguang Expressway11.3km, turn right slightly on the ramp and drive in the direction of Yiyang/Changsha /G55 13.
9. Drive along the ramp for 420 meters and turn right into expressway, Zhang Chang.
10. Drive along Chang-Zhang Expressway 129.9 km, and turn right slightly on the ramp in the direction of Wangcheng/Xiangtan/Guangzhou /S6 1.
1 1. Follow the ramp 1. 1 km, and go straight into Yuelin Expressway.
12. Drive along Yuelin Expressway for 3 15.6km, head for Jiahe/Guilin/Ningyuan /G76, turn right slightly and get on the ramp.
13. Drive along the ramp for 750 meters, cross Jiahe Interchange for about 90 meters, and go straight into Xiamen-Chengdu Expressway.
14. Drive along Xiamen-Chengdu Expressway for 92.7km, cross Xiaoshui Bridge, head for Hezhou /S8 1/G207/ Daoxian, turn right slightly and get on the ramp.
15. Follow the ramp 1.2km and go straight into Daohe Expressway.
16. Drive along Daohe Expressway for 49.5 kilometers and go straight into Daohe Expressway.
17. Drive along Daohe Expressway for 50 meters and go straight.
18. Drive 1.6 km, turn left and enter X078.
19. Drive along X078 for 680m and go straight to S203.
20. Drive along S203 for 35.4 kilometers, turn left slightly towards Hezhou and enter S203.
2 1. Drive 24.2km along S203, cross Ji Ling Village on the right for about 210m, and then go straight into G207.
22. Drive along G207 for 7.5km, drive towards Zhongshan, turn right ahead and enter G323.
23. Drive along G323 for 9.5 kilometers and enter Beihuan East Road.
24. Drive along Beihuan East Road for 2.3 kilometers and turn left into Yingbin Avenue.
25. Drive along Yingbin Avenue 16.2km, turn left slightly in the direction of G78 and get on the ramp.
26. Drive along the ramp for 540 meters, cross the overpass bridge of Huilong Interchange for about 120 meters, and go straight into Shantou-Kunming Expressway.
27. Drive 6.3km along Shankun Expressway, cross the small overpass bridge, head for Huangyao/Wuzhou/Luoding/Maoming, and turn left slightly on the ramp.
28. Drive along the ramp, cross Tongguhe Bridge 1 about 770 meters, and go straight into Baomao Expressway.
29. Drive along Baomao Expressway 194.2km, cross Yong 'an Separation Bridge, turn right slightly towards Yulin/Nanning, and enter Guang Kun Expressway.
30. Drive 740m along Guang Kun Expressway, cross Cenxi South Interchange and go straight into Guang Kun Expressway.
3 1. Drive along Guang Kun Expressway for 77.9 kilometers, cross Hengling Separation Bridge, and turn right slightly in the direction of Yulin East/Beihai/Yudong New District /S2 10 1.
32. Drive along the ramp 1. 1 km and go straight into Yulin Ring Expressway.
33. Drive along Yulin Ring Expressway for 30.9 kilometers and go straight into Zitie Expressway.
34. Drive along the self-railway expressway 128.6km, turn right slightly on the ramp and go to Qinzhou/Nanning/Hepu /G75.
35. Drive along the ramp for 930 meters and go straight into the Blue Ocean expressway.
36. Drive 27.2km along the Blue Ocean Expressway to Beihai/Lingshan, turn right slightly and enter the Blue Ocean Expressway.
37. Drive along Lanhai Expressway 1.7 km, and go straight into Sanbei Expressway.
38. Drive along the Sanbei Expressway for 25.8km and go straight into the Sanbei Expressway.
39. Drive along the Sanbei Expressway 10 meters and go straight.
40. Beihai Driving Scheme
1) Drive 640 meters and go straight into the first-class highway of North Railway.
2) along ... >>
Question 8: How many kilometers is the driving route from Baishi, Guangxi to Dazhi, Hubei? The whole journey is about 1384.6 km.
Starting point: Baise City
1. Baise driving plan
1) Start from the starting point to the northwest, drive along Xiangyang Road 1 10 meters, pass the south gate of Sunshine Beauty Shopping Mall on the right, turn left and enter Chengbei No.1 Road.
2) Drive 30 meters along Chengbei No.1 Road, pass Gree Air Conditioning for about 280 meters on the right, and go straight into Chengbei No.2 Road.
3) Drive along Chengbei Second Road 1.9 km, and go straight into Chengxi Road.
4) Drive along Chengxi Road 1.4km, turn right in the direction of Berlin Avenue and enter Dongzeng Road.
5) Drive along Dongzeng Road for 990 meters and go straight.
2. Drive 1. 1 km, turn right ahead and enter expressway, Guang Kun.
3. Drive along Guang Kun Expressway 1 14.4 km, turn right slightly and get on the ramp.
4. Drive along the ramp 1. 1 km and go straight into Ma Ping Expressway.
5. Drive along Ma Ping Expressway 83. 1km and go straight into Heilong Expressway.
6. Drive along Heilong Expressway 1 14.2km, turn right slightly and enter Wuping Expressway.
7. Drive along Wuping Expressway 1.6km and go straight into Quannan Expressway.
8. Drive along Quannan Expressway for 2 15.8km, drive in the direction of Lingchuan/Lingui New District/Airport/Longsheng, and turn right slightly to enter Guilin Ring Expressway.
9. Drive along Guilin Ring Expressway for 920 meters and go straight into Guilin Ring Expressway.
10. Drive along Guilin Ring Expressway for 26.8km, and turn right slightly to enter Quannan Expressway in the direction of Lingui New District/Longsheng/Xing 'an/Quanzhou.
1 1. Drive along Quannan Expressway for 560m, cross Yanggouhe Bridge and turn left to enter Quannan Expressway.
12. Drive along Quannan Expressway for 322.8km, drive towards Beijing/Changsha, turn right slightly and get on the ramp.
13. Drive along the ramp for 950 meters and go straight into Beijing-Hong Kong-Macao Expressway.
14. Drive along Beijing-Hong Kong-Macao Expressway 4 13. 1km, cross Baota Bridge and turn right slightly in the direction of Huangshi/Tongshan/Chongyang/Jiujiang.
15. Drive along the ramp 1.4km and go straight into Fairchild expressway.
16. Drive along Xiantong Expressway11.3km, cross Yanjiawan Bridge, turn right slightly in the direction of Huangshi/Qichun /S78, and enter Qijia Expressway.
17. Drive along Qijia Expressway1.4km and go straight into Qijia Expressway.
18. Drive along Qijia Expressway for 54.9 kilometers to Huangshi/Kaifeng, turn right slightly and get on the ramp.
19. Drive along the ramp 1.3km and go straight into Daguang Expressway.
20. daye city internal drive scheme
1) Drive along Daguang Expressway for 2.9 kilometers, get off at Daye/Jinhu /S3 15 exit, and turn right slightly on the ramp.
2) Follow the ramp 1. 1 km, then turn left into Zhu Jin Avenue.
3) Drive along Zhu Jin Avenue 1.7 km and go straight into Zhu Jin Avenue.
4) Drive along Zhu Jin Avenue 190 meters, take the second exit, turn left in the direction of Daye/S 201G106/S 315, and enter the mining and metallurgy avenue.
5) Drive 4.0km along Mining and Metallurgical Avenue and go straight into Mining and Metallurgical Avenue.
6) Drive 440 meters along Mining and Metallurgy Avenue, cross Daye Second Bridge, take 1 exit, and turn right into Jinjing Road/Qinglong Road /G 106.
7) Drive along Jinjing Road180m and turn left into Qinglong Road.
8) Drive along Qinglong Road for 940m and turn left into Hubin Road.
9) Drive along Hubin Road 1.2km and turn right into Zhanyue Road.
10) Drive along Zhanyue Road for 370 meters and reach the finish line (on the left side of the road).
Destination: daye city.
Question 9: How many kilometers is the specific route from Nanning, Guangxi to Jinjiang, Hubei? The whole journey is about 1238 km.
Starting point: Nanning
Destination: zhijiang city.
Question 10: How far is Guangxi from Hubei? Guangxi is in the south of Hubei, with a Hunan in the middle.