Do you know anything about indoor floor paint? What brands of indoor floor paint are there? What is the construction method of indoor floor paint? We will explain these problems one by one in the following article. Factories often use indoor floor paint. I hope the following introduction will give you a deeper understanding of indoor floor paint, and it will be easier only if you understand it.

First, the brand introduction of indoor floor paint

1, Guangzhou xiupo chemical coatings co., ltd., founded in 1984, became a member of NipponPaintChina's parent company NipseaGroup on February 20 13. Xiupo first introduced the production technology of floor paint in 1986. After years of development, it has grown into a coating enterprise integrating the production, sales and construction of floor materials, polyurea materials, MMA materials and other anti-corrosion and waterproof materials. Its product technology is widely used in the surface protection of buildings and equipment, with a comprehensive system, which is favored by the market and serves many internationally renowned enterprises and large-scale infrastructure projects.

2. Foster New Material Science and Technology Development Co., Ltd. was established in 1995. It is a large-scale modern enterprise integrating R&D, production, sales and construction of architectural coatings, thermal insulation, floors and thermal insulation decorative boards, and a professional supplier of integrated solutions for coatings, thermal insulation and thermal insulation in China. In the past 20 years, with the concept of "precision, precision and progress", we have focused on the research and application of the perfect effect of high-quality building exterior wall decoration, and the comprehensive strength of product research and development and production is leading in the whole industry, with a cumulative construction area of 400 million square meters, and leading the development of the industry with an annual growth rate of more than 30%.

3.ASHI China is the world's leading supplier of comprehensive coating solutions. Since 1998 was put into production in China, ASHI China has gained a firm foothold in the coating industry, set foot in many fields of the coating industry and related fields, and adhered to the group operation mode of "specialization in the industry and diversification in the fields". By 2006, ASHI China has integrated 6+ 1 product service system, 6+ 1 closed management system and 6+ 1 market network system, and built a sustained, rapid and efficient low-cost expansion platform with comprehensive painting solution as the core.

4. Mabel was founded in Milan, Italy on 1937. It is a leader in producing all kinds of adhesives and supporting products for floor and wall installation. Since 1960s, Ma Bei has been implementing the strategy of enterprise internationalization. Its basic strategic purpose is to meet the needs of the local market to the greatest extent and reduce the transportation cost of products as much as possible.

Second, the construction method of indoor floor paint

1, plain land treatment, basic plain land shall be subject to smooth surface of cement powder or grinding stone; Plain land needs to be maintained for more than 28 days, and the water content should be less than 8% before construction. If there are irregularities or depressions in the plains, they should be removed. Fill the ground with epoxy mortar; The oil on the ground needs to be thoroughly cleaned up; Before construction, the construction site should be kept dry and clean;

2. Before construction, the primer shall be kept clean. If there is any debris attached, it should be removed. The main agent and hardener should be mixed in the correct proportion and fully stirred. The viscosity should be adjusted according to the ground conditions, and the finished material construction should be completed within 4 hours; The curing and hardening time of the primer is about 8 or longer.

3. The intermediate coating should be kept clean before construction. If there is any debris attached, it should be removed. The main agent and hardener should be mixed in the correct proportion and fully stirred. Adding a proper amount of quartz sand into the mixed resin; Evenly daub the material with a trowel; Mixing materials needs to be completed within 30 days; Handle handover at the construction intersection; The curing and hardening time of the intermediate coating is about 8 or longer.

That's what Bian Xiao introduced to you. What are the brands of indoor floor paint and the construction methods of indoor floor paint? I hope Bian Xiao's introduction can help my friends.