Current location - Health Preservation Learning Network - Health preserving recipes - What is the installation height standard of bedside socket?
What is the installation height standard of bedside socket?
In order to charge the mobile phone and connect the desk lamp, we will consider installing a socket above the bedside table. As for how high it is, it is appropriate. The following small series will talk about the installation height standard of the bedside socket.

What is the installation height standard of bedside socket?

1, the height of the socket: generally about 70 cm to 80 cm, because the height of the bedside table is about 55 to 60 cm, so when installing the socket, the height is slightly higher than that of the bedside table. Sockets that are lower than or just blocked by the bedside table are also inconvenient to use.

2. Bedside socket and reserved space on both sides of bed: generally, the distance from both sides of bed is about 20cm.

How to install the bedside switch socket?

1. Design the width according to the bed width.

The distance between the switches should be the same as the width of the bed. If you buy a two-meter bed, the distance between the sockets on both sides should not be about two meters and five centimeters, and the height of the bedside table should not be too high or too low. At this time, you should communicate with the owner. It will be inconvenient to use if it is too high. If it is too short, it will cause the bedside table to cover the socket.

2, according to the owner's habits for installation.

If you like to watch your mobile phone in bed, at least two sockets should be installed on both sides to facilitate the charging of your mobile phone and computer. At the same time, it is necessary to set up a double-control switch to switch the bedroom main light, and it is also convenient to install the socket connected with the data line.

3. Installation layout of bedroom lamps and lanterns

Lighting in the bedroom will also affect the number of sockets. If you buy floor lamps, these lamps are directly installed with built-in wires, and it is good to use external sockets for power supply. Therefore, when designing the socket installation, we should also pay attention to whether there is a need for external lamps. If necessary, you should reserve additional sockets. If not, you should leave the switch and wires.

The above is a detailed introduction about the height of the bedside socket in the bedroom and the matters needing attention in installing the socket in home decoration, hoping to help friends in need. If you want to know more about it, you can continue to pay attention to our Qijia. Com platform, there will be more exciting content in the future.