The E2 fault of Rongshida washing machine belongs to the fault of water level sensor, which makes the washing machine unable to recognize the water level. In this case, it is necessary to check whether the circuit power supply, relay and water level sensor work normally, because the fault may not only be in the water level sensor. The following introduces the maintenance method of E2 fault of Rongshida washing machine.

1. Check whether the circuit power supply and relay are working normally. The inspection method is to connect the TV to a new power supply and turn on the power switch. If the TV can be placed normally, the screen is bright and can be set normally, then the circuit power supply and relay are normal; Otherwise, please replace the power supply or relay.

2. Check whether the water level sensor works normally. The inspection method is to turn off the power supply of Rongshida washing machine first, then remove the upper and lower water pipes and clean them again. If there are obvious impurities in the removed pipeline that may cause blockage, please remove them. After replacing the clean water pipes, turn on the power switch again.

3. Check whether the self-check function of this computer can run normally. Press and hold the consumables check key for three seconds, and then release it. At this time, the machine has been automatically turned on and entered the self-test interface. According to the interface display.

4. If the computer self-check function of the machine is running normally and the E2 fault has been eliminated, you can restart the Rongshida washing machine at this time.

The above methods are several ways to eliminate the E2 fault of Rongshida washing machine. If it is not convenient for self-maintenance, please contact the manufacturer's maintenance or professional maintenance personnel for inspection and maintenance. If there is a fault, please do not disassemble or repair it yourself, so as to avoid causing necessary losses or greater impact.