Net kettle's experience is that the filter element should be completely soaked for 2 hours before it can be used. Watching the filtered water flow down from the middle of the filter element, thin and clear, and flow into the pot, which is in obvious contrast with the pot. It takes about 20 minutes to filter a funnel of water.

The instructions say that the water filtered for the first three times should not be drunk, but should be poured out. "Every time you filter, tighten the filter element. It usually takes about a month to replace the filter element. The shelf life of filtered water is only 24 hours. Don't boil the filtered water many times, which will destroy the water quality.

I didn't dare to drink at first, and my heart was not practical. Drink it directly after drinking, and find it very sweet, which is better than Robust at home, so drink it directly now. The color is very clear and there are no impurities. Nowadays, many newly renovated families will install pipeline water purification equipment, so this small water purification kettle is more suitable for those families who have no conditions to install pipeline water purifiers or people who use less water. For example, renters have high flexibility and are more economical and convenient than buying mineral water for a long time. Rural families use it to send their parents away to show filial piety.

If the filter element is not screwed tightly, the tap water will flow down directly, which will affect the water quality; The small lid on the funnel is not pressed tightly, and it will fall off when pouring water. The non-slip apron at the bottom of the kettle falls off quickly, making it difficult to reassemble it. And every time I want to use it to fill tap water, can I connect it directly to the faucet with a water pipe?

Water will leak out of the funnel, like sweating. It takes 15 minutes to purify a funnel, which is relatively long. The filter element is leaking (do you want to try making a rubber ring). Date, manual, not easy to use. (Can it be electronic? )

It feels a bit unreliable to remove the newly opened filter element with black powder on it. Can this manufacturer require the cleanliness when leaving the factory? ) The sterilized one below is hard to twist out.