First, how long can I step on the tiles after pasting?
It takes about two days to step on the tiles after they are pasted. After the ceramic tile is pasted, it takes about two hours to complete the initial setting of cement mortar, and it takes two days to walk on the ceramic tile, but it takes 4~5 days for the cement mortar to completely dry. In addition, it is necessary to water and maintain the pasted tiles until they are stable.
Second, what problems should be paid attention to when tiling?
1, before tiling, don't forget to get rid of the dust on the ground base to avoid hollowing after tiling, which will be very troublesome for later maintenance, and the tiles need to be soaked for about two hours before pasting, and then they can be used after being taken out to dry. In addition, the cracks in tile paving should also be controlled as much as possible to ensure sufficient beauty.
2. If you are laying tiles in the bathroom or kitchen, you need to do a good job of running water slope to let the daily accumulated water flow out of the floor drain to avoid accumulated water. If the waterproof layer is accidentally damaged in the construction process, it is necessary to do waterproof again and carry out waterproof test until there is no leakage, and then brick laying can begin.
3. After the tile is pasted, it is necessary to clean the dust on the surface of the tile immediately, otherwise waiting for a long time will lead to the stain sticking too tightly and increase the difficulty of cleaning. About 12 hours after tiling, if empty drums are found, the surface needs to be resurfaced immediately to keep the budget at the lowest level.
I'll introduce you here first about how long it takes to step on tiles and what problems you need to pay attention to when sticking tiles. You got it? After the tile is pasted, you can't step on it immediately to avoid damage. You need to water it for 2 days to make it stick more firmly.